LeCroy WS-BATT-CHRG, Руководство пользователя, Страница: 16 / 26

BATTERY CHARGER User's Manual
(b) Connecting the BATTERY PACK to the BATTERY
CHARGER
Follow the steps below to connect the AC power cord, DC OUT
cable, and CHARGE CONTROL cable.
NOTE 2 Before starting the cable connections, always turn OFF the
POWER switches on the BATTERY PACK and
BATTERY CHARGER.
1. Connect the AC power cord to the rear panel of the BATTERY
CHARGER (see Figure 3-2) and another connector of the AC
power cord to a commercial power outlet.
Figure 3-2 Connection of AC Power Cord
2. Next, insert the DC OUT cable of the BATTERY PACK into the
BATTERY connector at the lower left portion of the front panel
of the BATTERY CHARGER. (See Figure 3-3.)
NOTE 3 At this time, connect the DC OUT cable while carefully
checking the polarities, positive (+) and negative (
−
)
terminals of the cable.
Figure 3-3 Connection of DC-OUT Cable
+ −
Battery connector
12