Leckey Squiggles+, Руководство пользователя

Страница: 15 / 32

Sq Stander User Manual p.15
9.0 Clinical setup for
postural management
9.1 Setting the Height
Set the height first by
placing the child in a lying
position on a mat. Measure
the distance from the child’s
feet to their hips.
The height between the
centre of the hip moulding
and the top of the sandal
should be set to this height
by adjusting the leg support.
Measure the distance
from the child’s feet to just
under their axilla and
the height between the top
of the chest support and
the sandal should be set
to this distance. Adjust this
distance by adjusting the
hip support.
It’s recommended to adjust
the height whilst the frame
is in an upright position
9.2 Adjusting the
overall height
The overall height of the
standing support can be
adjusted by loosening the
bolt on the back of the
main frame with the
multi-tool . Sliding the
inner stem to the desired
height and re-tightening
the allen bolt. A calibration
strip is fitted on the side
of the inner frame to help
you record the selected
positions of the supports.
There is also a safety stop
at the maximum height.
Never attempt to adjust the
height of the main frame when
the stander is in use.
WARNING: Adjust the overall
height after step 9.1 and
without the user in the product.