Lec TUN60152W, Руководство пользователя, Страница: 7 / 27

UK - 6 -
Installing and Operating your Fridge
The climate class of this appliance is Class N with an ambient temperature range of +16°C
and +32°C, the appliance should be sited within this ambient range.
The appliance may not operate consistently (possibility of defrosting contents or temperature
becoming too warm in the frozen food compartment) if it is sited for extended periods of time
below the cold end of the climate class temperature range for which the appliance is designed.
Operating voltage for your fridge is 220-240 V at 50Hz
• Before switching on place the appliance in an upright position and wait at least three
hours without moving the appliance. This will give the refrigerant circuit time to settle
and operate efficiently.
• Clean the appliance thoroughly, especially in the interior, before use (See Cleaning and
Maintenance).
• This appliance must be earthed.
• Insert the plug into a socket which is appropriate. This appliance has a plug already
fitted - if the plug is not suitable for your socket we suggest that you call an authorized
electrician for assistance. If the plug is damaged in any way - do not attempt to use it.
It must be replaced with a new plug.
• Do not install the appliance in direct sunlight, damp or cold conditions (i.e. in a garage
or out house). Do not allow the appliance to be exposed to rain.
• Place the appliance away from heat sources and in a well ventilated position. The
appliance should be at least 50 cm from radiators, gas or coal stoves, and 5 cm away
from electrical stoves.
• Keep the top clear by at least 2 cm, and do not overload the top of the appliance with
heavy items.
• If the appliance is installed next to another refrigerator or freezer, observe a minimum
distance of 2 cm to avoid condensation.
• Fit plastic wall spacers to the condenser at the back of the appliance to prevent the
appliance leaning against the wall.
• The appliance must stand firmly and level on the floor. Use the two front leveling feet to
level the appliance on the floor.
• Do not allow the condenser to be blocked. Regular cleaning will prevent a build up of
dust which may damage your appliance. You can clean the condenser with a brush or
a vacuum cleaner.
• The manufacturer is not responsible for failure to complete installation as
described in this guide.