Lec Pro Salon Designer Cabinetry Series Скачать руководство пользователя страница 15

SECTION 5: CARE & MAINTENANCE

SECTION 5: CARE & MAINTENANCE

13

This helpful troubleshooting guide will provide you with information about how to recognize a 

problem with your table, determine possible causes, and find a solution. 
In the event your specific situation is not covered in this guide, please contact Living Earth Crafts 

so our technical support department can assist you. Beyond the troubleshooting guide below, do 

not attempt to repair the table yourself. This can void your warranty. 
Unauthorized service will not be covered. Please be sure to contact Living Earth Crafts Customer 
Service first at (800) 358-8292, (760) 597-2155 Int’l.

Troubleshooting

Issue

Solution

Table does not 

raise or lower

1.  Ensure the table is plugged in.

2.  If using a dimmer switch, ensure it is turned to full power.

3.  Ensure the outlet in your room is receiving power. This can be done 

by plugging in a small appliance and turning it on.

4.  Ensure the switch on the attached power strip is turn on.

5.  Check the fuse or circuit breaker for blown fuse or tripped breaker.

6.  Ensure the controls are securely plugged into the junction box. 

Table does not 

raise or lower 

evenly

The hydraulic system may need repair. Do not attempt to repair it. 
Call Living Earth Crafts Customer Service.

Table does not 

operate in 

accordance with 

handset

1.  Ensure the handset is plugged into the receptacle nearest the power 

cord in the junction box, located under the table in the cabinet area. 

(Note: the foot pedal can be plugged into either of the next two 

sockets.)

2.  Ensure the handset is securely plugged into the junction box.

3.  If only one or two of the functions work, even though the controls 

are plugged in properly, the junction box may be faulty. Do not at-

tempt to repair it. Call Living Earth Crafts Customer Service.

Warranty Information

Living Earth Crafts (LEC) offers an industry best warranty against defects in materials, design, 

and workmanship, to the original owner, as follows:

• 

Frame - limited lifetime warranty*

• 

Foam and upholstery covering - warranted for three (3) years

• 

Motors, controls, electronics - warranted for two (2) years, including parts and labor

• 

Accessories and options - warranted for one (1) year, unless otherwise noted

LEC may repair or replace defective components at our discretion. LEC will return the warranted 

product, standard shipping pre-paid, to customers in the continental US. International customers 

are responsible for any applicable duties and taxes, as well as all shipping charges inbound and 

outbound.  Normal  wear  and  tear,  and  costs  associated  with  maintenance  procedures,  and 

damage caused by accident, misuse, improper maintenance, harsh operating environments or 

neglect (which includes tears in the upholstery and damage caused by harsh chemical-based 

cleaners) are not covered under this warranty. All warranties are limited to repair or replacement, 

at LEC’s discretion, unless otherwise stated.
*Lifetime warranty applies to the original owner, as long as you own your table for 5 years after 

the model is discontinued, or 5 years for private label tables.

RISK OF ELECTRIC SHOCK

Always unplug this furnishing from the electrical outlet before cleaning.

Содержание Pro Salon Designer Cabinetry Series

















Отзывы: