5
.
How to Operate Your Pyramid Kettle
Before using for the first time
Remove any adhesive stickers and foreign objects before use.
Boil and discard the water at least twice without adding any
chemicals or other additives. This will remove any dust or
residues remaining from the manufacturing process.
How to boil water
1. Lift up the jug kettle from the power base before filling with
water.
2.
Fill the jug kettle with water as required. Do not exceed the
“MAX” mark or below the “MIN” mark.
NOTE:
Do not fill the water over the maximum level, as water
may spill out of the spout when boiling.
3. Place the jug kettle onto the power base and connect to the
power socket.
4. Press down the power switch to start operating. The boiling
indicator light will be illuminated.
5. You may interrupt the boiling process at any time by lifting up
the switch to turn off the power.
6. The jug kettle will switch off automatically when the water is
boiled. The boiling indicator light will be turned off.
7. Disconnect the jug kettle from the power socket.
8. Do not open the lid whilst pouring as hot steam or hot water
may leak out and cause injury to the user.
9. If necessary, you may have to wait 15 to 20 seconds before you
can press the switch again to re-boil water.
