Touch a nd learn!
Touch a nd learn!
Rea
d o
ur co
mple
te
warr
ant
y po
lic
y o
nline
at
lea
pfr
og.
com/
warr
ant
y.
Vis
it
our
web
sit
e
lea
pfr
og.
com
for
more
inf
orm
ati
on
abo
ut p
rod
ucts
, d
ow
nloa
ds,
re
sour
ces
an
d mo
re.
Sca
n th
e Q
R
cod
e t
o e
nte
r our
Know
led
ge
Bas
e:
Or go t
o www.leapfr
og.zendesk.
com
LF815HD
LF815-2HD
LF815-0HD
5” WiFi High Definition
Video Monitor
Need help?
Visit leapfrog.com/support
Parent Guide
This guide contains important information.
Please keep it for future reference.
Connect, charge and power on the baby monitor
1. Connect the Baby Monitor
2. Charge the Parent Viewer battery before use
When you connect and turn on the Parent Viewer, the battery charges automatically.
Notes:
• Before using the baby monitor for the first time, charge the Parent Viewer battery for 12 hours.
When the Parent Viewer battery is fully charged, the battery icon becomes solid
.
• The standby time varies depending on the Baby Unit sensitivity levels you set for Auto Wake-Up,
your actual usage time and the age of the battery.
The battery icon on the screen indicates the battery status (see the following table).
Battery Indicators
Battery Status
Action
The screen displays
.
The
light flashes.
The battery has very little
power left and may only be
used for a short time.
Charge without interruption
(about 30 minutes).
The battery icon becomes
solid
.
The battery is fully charged.
To keep the battery charged,
connect it to AC power when
not in use.
3. Power On or Off the Baby Monitor
1. Slide the On/Off switch to
ON
in order
to power on your Baby Unit.
2. After the Parent Viewer is fully charged,
press and hold until the welcome screen
appears.
4. Positioning the Baby Monitor
1.
4.
2.
Note:
• To avoid interference from other electronic
devices, place your baby monitor at least 3
feet (1 meter) away from devices such as
wireless routers, microwaves, cell phones
and computers.
3.
Caution:
• The default volume of your Parent Viewer
is level 3, and the maximum volume is
level 5. If you experience a high-pitched
screeching noise from your baby monitor
while positioning:
- Make sure your Baby Unit and Parent Viewer
are more than 3 feet (1 meter) apart,
OR
- Lower the volume of your Parent Viewer.
Important Safety Instructions
The applied nameplate is located at the bottom of the Baby Unit’s base.
When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock
and injury, including the following:
1. Follow all warnings and instructions marked on the product.
2. Adult setup is required.
3. CAUTION:
Do not install the Baby Unit at a height above 2 meters.
4. This product is not a substitute for adult supervision of the infant. Supervising the infant is the parent’s or caregiver’s
responsibility. This product could cease operating, and therefore you should not assume it will continue working
properly for any given period of time. Further, this is not a medical device and should not be used as such. This product
is intended to assist you in supervising your baby.
5. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub
or swimming pool, or in a wet basement or shower.
6. CAUTION
: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the
Parent Viewer. The battery cannot be subjected to high or low extreme temperature and low air pressure at high
altitude during use, storage or transportation. Disposal of battery into fire or a hot oven, or mechanically crushing or
cutting or the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding
environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low
air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to
the information in
The RBRC seal
.
7. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the
product.
Power adapter information:
Baby Unit output
: Output: 5V DC 1A; VTech Telecommunications Ltd.; Model: VT05EUS05100
Parent Viewer output: Output: 5V DC 2A; V
Tech Telecommunications Ltd.; Model: VT07EUS05200
Rechargeable battery information:
Zhuhai Great Power Energy Co., Ltd.; Lithium battery, 3.7V 5000mAh; Model: GSP806090-5Ah-3.7V-1S1P
8. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not
designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
9. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
10. Unplug this product from the wall outlet before cleaning.
11. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not cut off the power adapters to replace
them with other plugs, as this causes a hazardous situation.
12. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or
crimped.
13. This product should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supply in your home, consult your dealer or local power company.
14. Do not overload wall outlets or use an extension cord.
15. Do not place this product on an unstable table, shelf, stand or other unstable surfaces.
16. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the
back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must
not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be
placed near or over a radiator or heat register.
17. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points
or create a short circuit. Never spill liquid of any kind on the product.
18. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility.
Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages
or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
19. You should test the sound reception every time you turn on the units or move one of the components.
20. Periodically examine all components for damage.
21. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless
telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby
monitor periodically by powering off and then powering on the units, and power off the baby monitor if you will not
use it for some time.
22. Children should be supervised to ensure that they do not play with the product.
23. The product is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
Cautions
1. Use and store the product at a temperature between 32
o
F and 104
o
F.
2. Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source.
3. Batteries should not be exposed to excessive heat such as bright sunshine or fire.
4.
Warning—Strangulation Hazard—Children have STRANGLED in cords. Keep this cord out of the
reach of children (more than 3 ft (0.9m) away). Do not remove this tag.
5. Never place the Baby Unit(s) inside the baby’s crib or playpen. Never cover the Baby Unit(s) or Parent
Viewer with anything such as a towel or a blanket.
6. Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away
from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors,
televisions, personal computers, kitchen appliances and cordless telephones.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the
interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug
Administration, WTR recommends to physicians that:
Pacemaker patients
• Should keep wireless devices at least six inches from the pacemaker.
• Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.
Electromagnetic fields (EMF)
This LeapFrog product complies with all standards regarding electromagnetic fields (EMF). If handled properly and
according to the instructions in this user’s manual, the product is safe to be used based on scientific evidence available
today.
What’s Included
Key Features
Technical Specifications
Frequency
2412-2462 MHz
Channels
1-11
LCD
5” Color LCD
(IPS 1280x720 pixels)
Nominal effective range
Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Power requirements
Parent Viewer: 3.7V 5000mAh Lithium-ion battery
Baby Unit power adapter: Output: 5V DC @ 1A
Parent Viewer power adapter: Output: 5V DC @ 2A
Credits:
The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license.
The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license.
Overview - Parent Viewer
Overview - Baby Unit
1 set for LF815HD
2 sets for LF815-2HD
x 2
x 2
Parent Guide
Color and B&W
Automatic Night Vision
Thanks to the latest starlight
sensor and noise suppression
technology, you can check in on
your baby 24/7 with the finest
clarity. Night vision is no longer
just black-and-white, you can
choose to see your baby in color at
night! For more details, see
Night
Vision (B&W and Color)
section.
Humidity and Temperature
Sensor
Rest assured of the environment
your baby is in with the
built-in real-time temperature
and humidity sensor. It lets you
know when the room is outside
a comfortable temperature and
humidity range. For more details,
see
Parent Viewer Icons
section.
Lullabies and
Soothing Sounds
Comforting and engaging your
baby can be done easily and
from a distance. Choose from 5
lullabies and 5 soothing sounds to
help lull your baby back to sleep.
For more details, see
Parent
Viewer Icons - lullaby
section.
Notes:
• The rechargeable battery in the Parent Viewer is built-in.
• Use only the power adapters supplied with this product.
• Make sure the Parent Viewer and the Baby Unit are not connected to the switch controlled electric outlets.
• Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not designed to hold
the weight of the Parent Viewer and the Baby Unit, so do not connect them to any ceiling, under-the-table, or cabinet
outlets. Otherwise, the adapters may not properly connect to the outlets.
• Make sure the Parent Viewer, the Baby Unit and the power adapter cords are out of reach of children.
• To maintain compliance with the FCC’s RF exposure guidelines, place the Baby Unit at least 20cm from nearby persons.
3. Status Check
Once your Baby Unit and Parent Viewer are
powered on, your Parent Viewer displays image
from the Baby Unit, and the
LINK
LED light
turns on. The Baby Unit’s
POWER
LED light also
turns on.
1
Link LED light
• On when the Parent Viewer
is linked to the Baby Unit.
• Flashes when the link to the
Baby Unit is lost.
2
Battery LED light
3
3-level sound indicator light
4
Night Mode quick set key
• Select black-and-white or
color night vision viewing
mode.
• Adjust night light
brightness.
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
1
Light sensor
2
Camera
3
Microphone
4
Infrared LEDs
5
Night light
6
Speaker
7
POWER LED Light
8
On / Off switch
Night Light
Need some additional lighting
near your baby for those bedtime
stories? The built-in night light on
the baby monitor can help with
that. You can control the night
light directly on the Baby Unit, or
remotely from the Parent Viewer.
For more details, see
Parent
Viewer Icons - Night Light
section.
Motion and Sound Sensor
With adjustable alerts on noise
or motion detected from the baby
monitor, give yourself a peace of
mind with an extra set of eyes. For
more details, see
Parent Viewer
Icons - Detection
section.
> 3ft (1m)
>
<
3ft (1m)
3ft (1m)
70
25.5°C
7 0
2 5.5 °C
9
Night light control key
• Press to turn the night light on or off.
• Tap and hold to adjust the degree of brightness
alternately; release when it reaches your
desired brightness level.
10
Antenna
11
Power jack
12
Wall mount holes
13
PAIR key
• The Parent Viewer and Baby Unit(s) provided
are already paired.
5
Arrow Keys
6
Menu / Select
7
Talk
/
Return
• Press and hold to talk to the
Baby Unit.
• While in a sub-menu, press
to exit.
8
Microphone
9
Volume
• Press to view the volume
adjustment bar.
>
3ft (1m)
<
3ft (1m)
70
25.5°C
70
25.5°C
Press and hold
10
Zoom
11
Power /
LCD Off
12
Antenna
13
Power jack
14
RESET
• Force reboot the
Parent Viewer.
15
Stand
Requirements
For mobile access
:
LeapFrog
mobile app
Network
Wi-Fi
Wi-Fi router
2.4GHz 802.11 b/g/n
Internet connection
1.5 Mbps @ 720p or 2.5 Mbps @1080p upload bandwidth per Baby Unit
Direct mode
The Parent Viewer and the Baby Unit of your video monitor connect to each other in
Direct mode
by
default, which allows you to stream live video right out of the box.
Direct mode
connection lets you
stream live video from the Parent Viewer only.
Tip:
• You may experience reduced signal strength if your Parent Viewer and Baby Unit are far apart, or there are
obstructing factors, such as internal walls, between them. Move the Parent Viewer closer to the Baby Unit to
improve the signal strength. You can also set up
Router mode
to connect the units via your home Wi-Fi network
to improve the connection between your Parent Viewer and Baby Unit.
Wi-Fi Router mode
You can continue using your video monitor
with
Direct mode
connection, or you can set
up your monitor in
Router mode
connection.
Router mode
uses your home Wi-Fi network
to connect your video monitor. It supports live
video streaming through the Parent Viewer
and smartphone app.
We recommend that you set up your monitor
in
Router mode
to enjoy live video streaming
via your Parent Viewer with an enhanced
connection.
If you want to stream live video remotely with
your mobile device, download and install the
LeapFrog
mobile app. With the mobile app,
your Wi-Fi router (not included) provides
Internet connectivity to your HD video monitor system. It serves as a communicating channel
between your Baby Unit and mobile device, allowing you to monitor and/or control your Baby Unit
wherever you are. For more details, see
Download app for mobile access
section in this Parent Guide
.
Notes:
• Your Parent Viewer detects the connection signal strength. If you have connected your video monitor with your
home Wi-Fi network, your Parent Viewer automatically switches to direct or router mode - whichever has a
stronger signal strength.
• When both Parent Viewer and app are viewing the camera simultaneously, the video quality will be optimised
to deliver the best possible viewing result.
70
25.5°C
Local access
7 0
2 5.5°C
Mobile access
Enhanced local access
Parent Viewer Icons
Main Menu Icons
Monitoring mode (For LF815-2HD only)
1
• Baby Unit 1 in
Single mode
2
• Baby Unit 2 in
Single mode
1 2
•
Patrol mode
Viewer displays video feeds from all
paired Baby Units at the same time
in split view.
•
Split mode
Viewer displays a single Baby Unit’s
video feed that transitions to a
different Baby Unit every 10 seconds.
Night light
• Turn
On
/
Off
night light.
• Select a night light
Color
.
Choose from 7 preset colors
and 3 light patterns.
• Select Auto
Brightness
mode (or)
• Adjust the fixed level night light
brightness.
• Set a
Timer
to turn the night
light off after 15, 30, or 60
minutes.
Lullaby
•
Stop
melody playing.
•
Play
all melodies.
• Play and view all
Songs
.
Choose from 5 melodies and
5 soothing sounds.
• Set a
timer
to stop playing
melodies after 15, 30, or 60
minutes, or let them play
non-stop.
Detection
Sound
• Select sound
Sensitivity
level.
• Turn on/off
Sound Detection Alert
.
Parent Viewer beeps when the Baby Unit
detects sounds above the chosen sound
sensitivity level.
• Turn on/off
Auto Wake Up
function.
Once the Baby Unit detects sounds
that are louder than the chosen sound
sensitivity level, the Parent Viewer screen
and speaker turn on automatically.
Motion
• Turn on/off
Motion Alert
.
Parent Viewer beeps when the Baby
Unit detects movements larger than the
chosen motion sensitivity level.
• Select motion
Sensitivity
level.
Temperature
• Turn on/off
Temperature Alert
.
When you turn it on, the Parent Viewer
beeps whenever the room temperature
detected by the Baby Unit falls outside the
set temperature range.
• Select the
Minimum
temperature of the
temperature alert range.
• Select
Maximum
temperature of the
temperature alert range.
• Select temperature
Format.
Change the temperature display format to
Fahrenheit (
o
F
)
or Celsius (
o
C
)
.
Parent Viewer settings
• Adjust Parent Viewer screen
Brightness
.
• Adjust
Low Battery Alert Tone Volume.
• Adjust
No Link Alert Tone Volume
.
• Turn on/off
Dim Mode
.
(See
Dim Mode
section to learn more)
• Change the
Language
on your Parent Viewer
Baby Unit settings
• Turn on/off
Status LED
indicator.
When on, the POWER LED light on the
Baby Unit turns on/off or flash to indicate
the camera’s conditions.
• Adjust the Baby Unit’s speaker
Volume
.
General settings
•
Configure Wi-Fi
.
Change your
Wi-Fi network
, select a
Connection Mode
, and check the Baby Unit
and Parent Viewer’s
Connection Status
.
•
Connect Mobile Phone
•
Add Baby Unit
•
Remove Baby Unit
•
Reset Settings to default.
•
Software Update
Check if your Parent Viewer software is up to
date, or install a new update when available.
Status Bar Icons
or
Current view status
• The Baby Unit number that is being viewed when in:
-
Single Baby Unit mode
-
Patrol mode
(* For LF815-2HD or pairing with LF815-0HD)
-
Split mode
(* For LF815-2HD or pairing with LF815-0HD)
Split mode
(* For LF815-2HD or pairing with LF815-0HD)
Patrol mode
(* For LF815-2HD or pairing with LF815-0HD)
Black and white night vision is activated.
Color night vision is activated.
Motion detection and alert is turned on.
Sound detection and alert is turned on.
Melodies or soothing sounds are playing.
Night light is turned on and the automatic
brightness setting is turned off.
How the system works?
4
5
3
2
1
6
7
8
9
10
11
12
13
UL STD.
62368-1
CERTIFIED TO
CSA STD.
CONFORMS TO
Tip
:
Do you icons look a little different? Your baby monitor
probably got a recent software update. Go to our online manual for
an overview of the latest icons (See
Online Help
).
Note:
• The
POWER LED Light
is
OFF
by default.
