ou sans avoir reçu les instructions nécessaires pour utiliser l’adaptateur
secteur et sans connaitre les dangers liés à sa manipulation. Vous pouvez
recharger les batteries rechargeables en utilisant l’adaptateur secteur inclut
ou en connectant le câble USB fourni à votre ordinateur. Nous recommandons
l’utilisation de l’adaptateur secteur.
Indication de chargement de la pile
Quand la pile se recharge, l’indicateur LED est jaune. Quand la pile est totalement
chargée, l’indicateur devient vert. L’indicateur ne fonctionnera pas si le produit n’est
pas connecté au câble USB ou s’il ne charge pas.
Réparer ou modifier LeapPad™3
N’essayez jamais de réparer ou modifier le LeapPad3 – car celui-ci ne contient aucune
pièce qui peut être réparée individuellement. Toute aide doit être faite par LeapFrog
Enterprises, Inc.
Si le produit a été en contact avec du liquide, troué, ou victime d’un impact fort ou est
tombé, arrêter son utilisation immédiatement et contactez le service client LeapFrog pour
remplacer le produit si celui-ci est sous garantie.
Pour toute information, visitez www.leapfrog.com/support/LeapPad3/Service
Informations de sécurité pour l’adaptateur AC
ATTENTION :
Utilisez uniquement adaptateur AC recommandé (transformateur)
pour recharger la pile. (Note : le mot transformateur est, des fois, remplacé par le mot
adaptateur). Utilisez uniquement adaptateur AC fourni.
ATTENTION :
Ne convient pas aux enfants de moins de 36 mois. Une utilisation
inappropriée du transformateur (adaptateur AC) peut causer un risque d’électrocution.
• L’adaptateur doit être branché à la prise murale par un adulte ou un enfant de plus
de 8 ans uniquement.
• Ce transformateur n’est pas un jouet, et son utilisation doit être faite uniquement sous
la présence d’un adulte.
• Comme avec tous produits électriques, des précautions doivent être utilisées pour
éviter des électrocutions.
• Le transformateur peut chauffer pendant son utilisation normale. Vérifiez que la
ventilation est adaptée et faites attention quand vous utilisez ce produit.
• Ne branchez ou débranchez pas le produit avec des mains mouillées.
• Le transformateur doit être vérifié régulièrement (les lames, la prise, la prise murale
et tout autre pièce) car si celui-ci est endommagé, il peut être un risque d’incendie,
d’électrocution ou autres blessures. Si celui-ci est abimé, arrêter de l’utiliser
immédiatement et attendez que celui-ci soit réparé avant de le réutiliser. Le câble de
cet adaptateur ne peut pas être remplacé, si le câble est abimé, jetez le transformateur
en suivant les règles de recyclage de votre région.
Débranchez l’adaptateur (transformateur) si une de ces
conditions existe :
• Le câble, la prise ou le câble USB est abimé ou cassé.
• Le câble, la prise ou le câble USB sont exposés à la pluie, à du liquide ou
une humidité excessive.
• La boite de protection de l’adaptateur est abimée.
• Si vous pensez que l’adaptateur a besoin d’être réparé.
Débranchez le LeapPad
™
3 de l’adaptateur avant de le nettoyer.
• Pour nettoyer l’adaptateur, débranchez–le de la prise murale et nettoyez-le
avec un chiffon légèrement humide. Ne l’immergez pas dans l’eau,
n’utilisez pas de savon ou autres produits chimiques. Laissez le produit
sécher avant de le réutiliser. Ne pas brancher l’adaptateur si celui-ci est
mouillé ou abimé.
• Ce jouet doit être utilisé avec un adaptateur pour jouets. Cet
adaptateur CA doit exclusivement être utilisé pour recharger la pile
Li-Poly de la tablette LeapPad3 LeapFrog (3.7Vdc, 2500mAh).
ATTeNTION :
Ne PAS ReCHARgeR des piles pas rechargeables.
Pour l’Europe, ce jouet doit être utilisé avec un adaptateur pour jouets.
Caractéristiques électriques de l’adaptateur secteur : Voltage d’entrée 120 VAC, 60 Hz
(pour les États-Unis et Canada); 230 VAC, 50 Hz (Pour le Royaume-Uni et l’Europe); 240
VAC, 50Hz (pour l’Australie et la Nouvelle Zélande). Voltage de sortie : DC5V, 1.5A, 7.5VA.
Exposure to Radio Frequency Energy
LeapPad3 contains a radio transmitter and receiver. When powered ON, LeapPad3
sends and receives radio frequency (RF) energy through its internal antenna. The
exposure requirements use units of measurement termed SAR (specific absorption
rate). LeapPad3 has been tested and found to meet the SAR exposure requirements for
Wi-Fi operation as established by FCC, IC, and European Union guidelines.
The highest SAR value as reported to the authorities for this tablet PC model when tested
for use against the body is 0.29W/kg.
The tablet PC has been tested when positioned at 0 mm from the body, without any
metal parts in the vicinity of the tablet PC and when properly used with an appropriate
LeapFrog Accessory.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note:
Changes or modifications to this unit not expressly approved by LeapFrog could
void the EMC and wireless compliance and void the user’s authority to operate the
equipment. This product demonstrated EMC compliance using compliant peripheral
devices and shielded cables between system components. It is important that you use
compliant peripheral devices and shielded cables to reduce the possibility of causing
interference to radios, televisions, and other electronic devices.
USB Cable.
The USB cable provided with this product complies with FCC and other regulatory
Emission limits. If using other than the provided USB cable, please note that in order not to
exceed FCC and other regulatory emissions limits, a shielded cable must be used.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
La plus haute valeur de débit d’absorption spécifique (DAS) reportée aux autorités pour
ce modèle de tablette quand testée près d’un corps est de 0.29W/kg.
Cette tablette a été testée à 0 mm du corps sans aucune pièce en métal à proximité de
la tablette ou proprement utilisée avec un accessoire approprié LeapFrog.
Canadian Compliance
This device complies with CAN ICES-3(B)/NMB-3(B) and the Canadian Radio
Standard Specification RSS-210. The IC term stands for “Industry Canada” followed by
the certification number and all the “Contains IC: 4810A-31500” signifies is that the
equipment meet the Radio Standard Specification RSS-210. The IC certification number
is located on the back of the enclosure.
Ce produit est conforme aux normes CAN ICES-3(B)/NMB-3(B) et à la spécification
RSS-210 des standards de la radio canadienne. Le terme IC signifie “Industrie Canada”
et est suivi du numéro de certification “inclut : IC: 4810A-31500” ce qui signifie que
l’équipement répond aux spécifications de la norme Radio RSS-210. Le numéro de
certification IC est situé à l’arrière de l’enceinte.
European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz).
This wireless device complies with the R&TTE Directive.
EU Declaration of Conformity
LeapFrog Enterprises, Inc., hereby declares that this Wi-Fi device is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
LeapFrog Enterprises, Inc, déclare que ce produit Wi-Fi est conforme aux règles
essentielles requises et autres provisions de la Directive 1999/5/EC.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to
normal operation when the interference stops. If not, it may become necessary to turn the
power OFF and then back ON.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose
memory, requiring the user to reset the device by turning the power OFF and then back ON.
Recycling
For information on how this product might be recycled, visit www.leapfrog.com/recycle
or call (800) 701-5327.
Copyrighted Sofware
Certain software included in this product contains copyrighted software that is licensed
under the General Public License (GPL). A copy of that license is included below in this
document. Anyone may obtain from us the complete corresponding source code for the
software covered by the GPL for a period of three years after our last shipment of this
product by contacting LeapFrog customer service at [email protected].
Please write “GPL source code for LeapPad3” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the
physical media on which the source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
PREAMBLE
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the gNU general Public License is
intended to guarantee your freedom to share and change free software—to make sure the software is free for all its users. This general Public
License applies to most of the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other
Free Software Foundation software is covered by the gNU Lesser general Public License instead.) You can apply it to your programs, too. When
we speak of free software, we are referring to freedom, not price. our general Public Licenses are designed to make sure that you have the
freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it,
that you can change the software or use pieces of it in new free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These
restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies
of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or
can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute
and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no
warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not
the original, so that any problems introduced by others will not reflect on the original authors’ reputations. Finally, any free program is threatened
constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect
making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed
under the terms of this general Public License. The “Program,” below, refers to any such program or work, and a “work based on the Program”
means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either
verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term
“modification”). each licensee is addressed as “you.” Activities other than copying, distribution and modification are not covered by this License;
they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents
constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what
the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously
and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this
License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may
charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute
such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to
be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in
the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or
else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view
a copy of this License. (exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the
Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that
work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of
a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the
right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based
on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2
above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically
performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to
distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in
object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code
means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and
installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in
either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless
that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy
the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source
along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License. Any attempt otherwise
to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However,
parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties
remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute
the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing
the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for
copying, distributing or modifying the Program or works based on it.
6. each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original
licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the
recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions
are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you
from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other
pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-
free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both
it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable
under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other
circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of
any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented
by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in
reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any
other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence
of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original
copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries,
so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written
in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the general Public License from time to time. Such new versions
will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. each version is given a distinguishing
version number. If the Program specifies a version number of this License which applies to it and “any later version”, you have the option of
following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does
not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to
ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
No WARRANTY
11. BeCAUSe THe PRogRAM IS LICeNSeD FRee oF CHARge, THeRe IS No WARRANTY FoR THe PRogRAM, To THe eXTeNT PeRMITTeD
BY APPLICABLe LAW. eXCePT WHeN oTHeRWISe STATeD IN WRITINg THe CoPYRIgHT HoLDeRS AND/oR oTHeR PARTIeS PRoVIDe
THe PRogRAM “AS IS” WITHoUT WARRANTY oF ANY KIND, eITHeR eXPReSSeD oR IMPLIeD, INCLUDINg, BUT NoT LIMITeD To, THe
IMPLIeD WARRANTIeS oF MeRCHANTABILITY AND FITNeSS FoR A PARTICULAR PURPoSe. THe eNTIRe RISK AS To THe QUALITY AND
PeRFoRMANCe oF THe PRogRAM IS WITH YoU. SHoULD THe PRogRAM PRoVe DeFeCTIVe, YoU ASSUMe THe CoST oF ALL NeCeSSARY
SeRVICINg, RePAIR oR CoRReCTIoN.
12. IN No eVeNT UNLeSS ReQUIReD BY APPLICABLe LAW oR AgReeD To IN WRITINg WILL ANY CoPYRIgHT HoLDeR, oR ANY oTHeR
PARTY WHo MAY MoDIFY AND/oR ReDISTRIBUTe THe PRogRAM AS PeRMITTeD ABoVe, Be LIABLe To YoU FoR DAMAgeS, INCLUDINg
ANY geNeRAL, SPeCIAL, INCIDeNTAL oR CoNSeQUeNTIAL DAMAgeS ARISINg oUT oF THe USe oR INABILITY To USe THe PRogRAM
(INCLUDINg BUT NoT LIMITeD To LoSS oF DATA oR DATA BeINg ReNDeReD INACCURATe oR LoSSeS SUSTAINeD BY YoU oR THIRD
PARTIeS oR A FAILURe oF THe PRogRAM To oPeRATe WITH ANY oTHeR PRogRAMS), eVeN IF SUCH HoLDeR oR oTHeR PARTY HAS BeeN
ADVISeD oF THe PoSSIBILITY oF SUCH DAMAgeS.
TM & © 2014 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com/leappad
Recommended for children ages 3-9 years.
Convient aux enfants de 3 à 9 ans.
Model:
LeapPad
™
3
Model: 31500/31510/81500/81501
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
Item numbers: 31500/31510
Part Number: 605-12117-E
Certification and Compliance
U.S. Model: 31500
Contains FCC ID: QDX31500
Canada Model: 31500
Contains IC: 4810A-33200
Meets ICES 003
E.U.
0700
NB Number
