3
Complete these easy steps to start your child playing and learning with
the LEAPSTER EXPLORER™ camera and video recorder:
1. Unscrew the accessory port cover marked at the bottom of
your child’s LEAPSTER EXPLORER handheld using a Phillips screwdriver.
(Retain and reuse the cover when this accessory port is not in use.)
2. Plug the camera attachment into the accessory port.
3. Turn on the handheld by pressing the power button.
4. Connect the USB cable to the handheld and your computer.
NOTE:
A USB cable was included with the handheld.
USB Cable:
Use only the USB cable provided by LeapFrog. Using any
other cable may exceed FCC and other regulatory emissions limits. The
USB cable is not a toy. Disconnect the toy from the USB connection
before cleaning.
Câble USB :
Utilisez exclusivement le câble USB fourni par LeapFrog
Enterprises Inc. L’utilisation d’un autre câble peut dépasser les limites de
la FCC (Commission fédérale américaine des communications) et autres
limites règlementaires en matière d’émission. Le câble USB n’est pas un
jouet. Déconnectez le jouet du port USB avant d’entamer toute opération
de nettoyage.
5. Click on the LEAPFROG Connect icon on your computer desktop to
open the application. The camera and video recorder software will
automatically download onto the handheld. When you see the message
confirming files have been saved to your LEAPSTER EXPLORER, it is safe
to disconnect the handheld from the computer so your child can play!
Getting Started
NOTE:
To use this camera and video recorder, you must install
software from the LEAPFROG
®
Connect Application. If you do not
have the LEAPFROG Connect Application for LEAPSTER EXPLORER
™
installed on your computer, please go to leapfrog.com/support
Plug in camera attachment
Push power
button
Connect USB
cable to computer
and handheld
2
3
4
Unscrew
accessory
port cover
1
