LEAP4LIFE Fitbug, Добро пожаловать в руководство

Страница: 4 / 11

You can wear your Bug in a number of different ways; clip it to
your waist, carry it in your front pocket, put it in your handbag or
even wear it around your neck using a lanyard.
Your Fitbug is not waterproof. Do not immerse it in water.
STEP-UP
4
UPLOAD YOUR DATA
To get the most from your LEAP4LIFE membership, you should upload
your data every day. Follow these simple steps to upload:
• ON DEMAND – To manually push data from your Fitbug to
the LEAP4LIFE site, make sure your computer is on, the
dongle is inserted, you are connected to the Internet and the
Fitbug software is running. Then hold the middle button for
approximately two seconds until it says DATA. The Fitbug will say
DONE when it has uploaded.
• BEACON – You can also set your Fitbug to upload data on a
regular basis. In Set-up mode, turn BEACO to ON. And then select
the timing. (Keep in mind that the shorter the frequency, the
more battery your Fitbug will use.) When Beacon is enabled, the
Fitbug will upload your data whenever your computer is ready
to receive data. It will only complete another upload if you have
taken at least 200 steps. The Fitbug will not notify you when it
does a beacon upload.
Your Fitbug will store your data for up to 14 days. If you haven’t
uploaded your data for 10 days, this symbol will be on your
display. This means that you only have a few days left before your
earliest information starts to be overwritten.