2
.
Matching the frequency of car and remote control
13
14
5A
、
10A
、
13A
、
15A
3.Instructions of the recoverable fuse
When the current exceeds 5 (or 10,
or13, or 15) amperes, the
recoverable fuse will automatically
cut off the power supply for 5-
10seconds, then the current will be
resupplied. (optional)
Q
Install front
bumper
Press Q (front bumper)
i n t o t h e g r o o v e o n t h e
front of the car body, then
hike up Q to fasten it.
1. The installation and replacement of the batteries
in the remote control:
AAA
DC1
.
5V
AAA
DC1
.
5V
AAA
DC1
.
5V
+
-
Direction for use
Use a screwdriver to remove the battery cover of the remote control, insert
two AAA 1.5V dry batteries in correct polarity. Close the battery cover and
fix it with the screw. (Battery replacement also according to the above
steps)
1.All batteries should be inserted in the correct polarity.
2.Non-rechargeable battery cannot be recharged
3.Before charging, the rechargeable battery must be taken out from the
toys.
4.Take out and properly deal with the dead battery. To avoid injury, please
keep kids away from the battery.
5.The direct contact between the positive and negative terminals may result
in fire or explosion. Avoid direct connect between the terminals.
6.Do not mix old and new batteries.DO not mix alkaline, standard(carbon-
zinc),or rechargeable(nickel-cadmium) batteries.
7.Only an adult who has read and understood the safety warnings can
recharge the battery.
Operation
manual
:
For
the
first
time
to
use(Or Replace the
battery)Need to frequency bind
Take out the remote control,install the battery
Long press on the frequency key 2-4 seconds,Low speed LED lights
will flash
Turn on the power of the car,Low speed LED lights will from flash to
long lighting,then frequency bind succeed
If the frequency bind failed(Low speed LED lights flash), remove the
battery and repeat steps 1-3
Remote control without operation after 10 seconds,indication light will
off into power saving mode
Button Description: forward backward turn left turn
right
S: Speed P:emergency brake,press it and the running
function willfaal,press again,it release
Forward Button
LED Light
Reverse Button
The remote control operation always prior to the foot pedals
operation.(The foot pedal won't work whileoperating remote control)
