Leakomatic M3i, Руководство пользователя

Страница: 33 / 40

33
You can deactivate
Pause mode anytime by pressing the mode button. The system
will return to its previous mode of operation.
The unit can be configured so that the valve is kept closed in AWAY mode. If this
function is activated, no tightness test is performed. Instead, the unit continuously
measures the pressure and warns if the pressure in the system drops below 1 bar.
Alarms
The alarm indicator flashes during the warning and stays
on during the alarm. Press the Clear button briefly to
silence the warning and alarm sounds. Keep the Clear
button pressed to clear the alarm.
The system shuts off water only in case of an alarm. Silence the alarm by briefly
pressing the Clear button and find the cause of the alarm. The water will start to
flow again only after the alarm has been cleared.
The device warns before sounding an alarm if a delay has been set. The alarm must
be manually cleared whereas warnings can be automatically cleared through the
system after the cause of the alarm has passed.
You can set a time frame when the system stays silent in order to guarantee
uninterrupted sleep. Alternatively, you can permanently disable the alarm sound or
only allow sounds during a warning/alarm.
Alarm Description
Flow test
Flow has continued longer than the set maximum time.
See further information in Flow test.
Tightness test The tightness test detects possible hidden leaks.
See further information in Tightness test.
AUX1 IN
AUX1 input is activated.
AUX2 IN
AUX2 input is activated.
Frost guard
The temperature at the sensor is below the set level
Sensor
Measurement value is missing from pressure sensor or frost
guard