Time Searching
When the system is playing back video, you can choose to view the video
that was recorded during a certain period of time. Press the
REC
button
while playing back video will display the Time Searching OSD on the screen
as shown in the screen shot on the left hand side below.
Pressing the
REV
(left arrow) or
SLOW
(right arrow) button will bring out the
highlight (the screen shot on the right hand side above) that allows you to
set the
Present
time for Time Searching. After you finish setting the time,
press the
REC
(OK) button to start searching. The screen will display the
frozen picture of the searched time.
The
Start
and
End
time display on the screen remind you of the starting
and ending time of the entire length of video.
If no video was recorded at the starting time set for Time
Searching, the system will find what's closest to the setting
time and display it.
The system's failing to find the accurate starting time may be
caused by the difference between Quad Processor timer and
system timer. Be sure to synchronize both timers to have an
accurate time searching result.
We suggest that you set the system timer (see page E-20)
and Quad Processor timer (see page E-11) when you use
the product for the first time.
(See page? for how to use the buttons on the front panel to control the OSD)
Time Searching Trouble Shooting
Playback (Cont'd)
VIDEO RECORDING/PLAYBACK
VIDEO RECORDING/PLAYBACK
VIDEO RECORDING/PLAYBACK
15
VIDEO RECORDING/PLAYBACK
E-
Содержание SecurityDVR LTR-3100
Страница 1: ...USER S MANUAL ...
