Plug power cord in the power
outlet in the wall.
Plug the power adapter in the
unit.
Turn on the power switch.
Power Indicator OFF
Make sure the power indicator
is ON, and select the
appropriate video input for TV.
No image is displayed on TV
screen
Plug RJ-45 cable from the
Internet device into "WAN"
jack on the unit.
Can not dial an IP address
Increase light on the image
and reduce back lighting.
Video of local view is dark
Aim the Videophone at a
strong white light source
momentarily.
Increase the room light level.
Video in local view has a red cast
Hang up and call again.
Make sure the remote video
phone is compatible with
H.323 standard.
Ask the other party call you.
Video connection is not
established correctly
Probable cause is bad
connection (noisy line). Hang
up and try again. This time,
ask the other party to call you.
Green or yellow blocks appear in
the remote picture
Your Videophone is reliable and easy to use. If you encounter any problem
while using this product, please refer to the table below for possible solutions.
Other problems
39
Be sure the RJ-45 wire is
plugged into the "WAN" jack
directly on the Videophone.
The unit is not responding when
the
button is pressed
OK
