MA860 Microstepping Driver Manual V1.0
Tel: +086 0755-26434369 1 Web Site: www.leadshine.com
1. Introduction, Features and Applications
Introduction
The MA860 is a high performance microstepping driver based on pure-sinusoidal current control
technology. Owing to the above technology and the self-adjustment technology (self-adjust current
control parameters) according to different motors, the driven motors can run with smaller noise,
lower heating, smoother movement and have better performances at higher speed than most of the
drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.
Features
l
High performance, cost-effective
l
Supply voltage up to 60VAC or +80VDC
l
Output current up to 7.2A
l
Self-adjustment technology
l
Pure-sinusoidal current control technology
l
Pulse input frequency up to 300 KHz
l
TTL compatible and optically isolated input
l
Automatic idle-current reduction
l
15 selectable resolutions in decimal and
binary, up to 51,200 steps/rev
l
Suitable for 2-phase and 4-phase motors
l
Support PUL/DIR and CW/CCW modes
l
Short-voltage, over-voltage, over-current
and short-cicuit protection
Applications
Suitable for a wide range of stepping motors, from NEMA size 17 to 43. It can be used in various
kinds of machines, such as X-Y tables, labeling machines, laser cutters, engraving machines,
pick-place devices, and so on. Particularly adapt to the applications desired with low noise, low
heating, high speed and high precision.
2. Specifications
Electrical Specifications
(T
j
= 25
℃
/77
℉
)
MA860
Parameters
Min
Typical
Max
Unit
Output current
1.8
-
7.2 (5.1 RMS)
A
18
48
60
VAC
Supply voltage
+24
+68
+80
VDC
Logic signal current
7
10
16
mA
Pulse input frequency
0
-
300
KHz
Isolation resistance
500
M
Ω
MA860 Microstepping Driver Manual V1.0
Tel: +086 0755-26434369 2 Web Site: www.leadshine.com
Operating Environment and other Specifications
Cooling
Natural Cooling or Forced cooling
Environment
Avoid dust, oil fog and corrosive gases
Ambient Temperature
0
℃
－
50
℃
(32
℉
－
122
℉
)
Humidity
40%RH
－
90%RH
Operating Temperature
70
℃
(158
℉
) Max
Operating Environment
Vibration
5.9m/s
2
Max
Storage Temperature
-20
℃
－
65
℃
(-4
℉
－
149
℉
)
Weight
Approx. 570g (20.10 oz)
Mechanical Specifications (
unit: mm[inch]
)
Figure 1: Mechanical specifications
*Recommend use side mounting for better heat dissipation