DM432C Digital Stepping Driver Manual V1.0
Tel: +086 0755-26434369 15 Web Site: www.leadshine.com
13. Professional Tuning Software ProTuner
Introduction
This section will provide an overview of connection and basic setup instructions for Leadshine
’
s
digital stepping driver DM432C using the
ProTuner
software. These instructions will walk you
through the following steps necessary to start up your driver and motor. This section is intended for
setting up the driver with the
ProTuner
.
Software Installation
The
ProTuner
is windows based setup software for tuning Leadshine
’
s digital stepper driver
DM432C. It can run in windows systems, including Win95/Win98/WindowsNT/ Windows
2000/Windows XP. And the selected PC should have 1 serial port at least for communicating with the
driver.
Double click
“
ProTuner_DM432C.exe
”
to begin installing the
ProTuner
. See Figure 11. Click
Next
to enter the
“
License Agreement
”
window. See Figure 12.
Figure 11: Begin to install the ProTuner
DM432C Digital Stepping Driver Manual V1.0
Tel: +086 0755-26434369 16 Web Site: www.leadshine.com
Figure 12: License agreement
Choose
“
I agree to the terms of this license agreement
”
and click
Next
to continue installation. The
user can enter user
’
s information in the following window. See Figure 13. After entering the user
’
s
information, click
Next
to select installation folder, where you would like to install the
ProTuner
. See
Figure 14.
Figure 13: User
’
s information settings