14
4 SEISMIC SEARCH MODE
4.1 Using the seismic sensor
To power on the wireless sensor, the push button must be pressed for at least 1 second. When the sensor
is powered on, the green push button LED lights:
•
Slow flashing:
no connection with the control box.
•
Fixed:
connection with the control box in progress.
•
Fast flashing:
connection with the control box
established.
•
Very fast flashing:
pairing sequence in progress (see
Pairing section).
To power off the sensor, the push button must be pressed for at least 1 second.
If the sensor does not connect with the control box, it powers off automatically
after 20 seconds.
To connect several wireless sensors, it is important to use the following powering
on sequence:
1.
Power on the control box until the
LEADER Search
logo is displayed.
2.
Press the sensor push button. When its LED flashes quickly the connection is complete
and the corresponding sensor bar chart appears on the control box screen.
3.
Repeat step 2 for the next sensor.
Important: Do not power on all the sensors at the same time, but one after the other.
Wait for the powered on sensor to appear on the screen before powering on the next sensor.
