background image

 

 

3.2  Charger characteristics 

Supply:

 110 / 220 V 

– 50 Hz Frequency  

Charge time:

 24 hours (when battery is fully discharged). Rely on the light on the charger. 

For more information see the manufacturer attached manual of the charger.

 

3.3  Gas supply  

Possible with one or two industrial Propane gas cylinders of 13 kg type without flow limiter                  
or fourth cylinders 13 kg Propane domestic type with two kits flow limiter 

réf: V90.80.053

                   

Adjustable flow regulator gas. 
Gas supply hose of 6m to be screwed. 
 
It is advisable to use industrial or domestic Propane gas cylinders (13 kg or 35 kg)                             
from Antargaz company (France). For supply points: www.Antargaz.com 
Outside France, consult the country's gas supplier. 
 

3.4  The remotes control 

PYROS 3

 comes with one wired remote control and one wireless remote control. 

A single remote control can be used at once as only one electrical connector is placed                       
on the tray. 

3.5  Wired remote control 

-It Connects directly to the tray, allowing the ignition and extinguishing                    
of the fire. 
-Water resistant. 
-Ddesigned to avoid accidental triggering. The control button is indeed 
protected by a cover which overlooks the button height. To trigger the burning 
gas, the button must be deliberately push. In the event of a fall or shock it 
protects it. 
-Electrical cable length: 9 meters 
-Fire resistance: Certified to IEC 331. 
-Temperature range: -60 ° C to 180 ° C. 

3.6  Wireless remote control  

-Range: 30 m 
-Battery: GP27A 12V 18mAh 
-It Works hand in hand with a radio receiver attached under 
the table desk. This module consists of a housing with its 
antenna and is resistant to water. 
-The electric cable which connects the receiver to the tray is 
the same length as the reinforced gas supply hose. 
-Temperature range: -60 ° C to 180 ° C. 
 
 
 
 
 

Содержание PYROS 3
























Отзывы: