Leader PYROS 3, Руководство пользователя

Страница: 18 / 23

18
8.2 Implementation of the adapter and accessories
The trainings must be completed with accessories on tray filled with water only.
Prior to manipulating the tray, shut down the system:
1. Turn off the gas supply by pressing the emergency stop button
2. Purge the line by pressing the remote control button and let the remote on the control desk
3. Close the valve located at the bottom of the tray on the gas circuit to concentrate the action
of flame only in the adapter
4. An adapter (support for various training accessories) should be positioned in the tray.
It also concentrates the flames. The adapter must be positioned on the first side of the tray
(side without wheels). The notches in the base of the adapter must fit on the gas circuit.
Accessories land on this adapter.
5. Adjust the gas regulator at a low rate (1 bar max).
6. When you release the button on the remote control, the fire can continue for a while in
the accessory, because it was filled with gas. Wait several seconds before re-ignite so that
the adapter and the accessory are no longer saturated with gas.
Nota: The accessories allow to obtain different shapes/height of flames.
By leaving open the valve, we can simulate the burning of the accessory and the
full tray.