5. BASIC OPERATING PROCEDURES
56
5. BASIC OPERATING PROCEDURES
This chapter explains the basic operating procedures of the LV 7770. We recommend that you
follow these basic operations until you fully understand how the LV 7770 is designed to operate.
Figure 5-1 Operating procedures
1. Select the display format.
Press MULTI to select the 1-screen display or the multi-screen display.
See section 5.1, “Selecting the Display Format”
2. Select the display area.
Press a key from 1 to 4 to select the display area.
See section 5.2, “Selecting the Display Area.”
3. Select the input signal.
Press SDI or CMPST to select the input signal.
See section 5.3, “Selecting the Input Signal.”
4. Select the input channel.
Press A or B to select the input channel.
Press SIM to measure channel A and channel B simultaneously.
See section 5.3, “Selecting the Input Channel.”
5. Select the display mode.
Press WFM, VEC, PIC, AUDIO, STATUS, or EYE to select the display mode.
See section 5.5, “Selecting the Display Mode”
6. Configure the display mode.
Use the function keys and the related keys to configure the settings.
See section 4.7, “Panel Operation Basics.”
7. If you selected the multi-screen display in step 1, repeat steps 2 to 6 to specify the settings
for all the areas.
