Leader LV 5333, Инструкция по эксплуатации

Страница: 84 / 239

72
9. CINELITE DISPLAY
→ F•1 f_Stop DISPLAY → F•2 MEAS POS: P1 / P2 / P3
→ F•2 %DISPLAY → F•2 MEAS POS: P1 / P2 / P3
→ F•1 f_Stop DISPLAY → F•1 F.D: LINE / SAMPLE
→ F•2 %DISPLAY → F•1 F.D: LINE / SAMPLE
9.4 Selecting the Measurement Points
You can set up to three measurement points.
To select the measurement point to move with the cursor, follow the procedure below.
Procedure
CINELITE
9.5 Configuring the Cursor Settings
To set a measurement point, press MEAS POS to select the measurement point, and
then move the X and Y cursors. You can set the line with the Y cursor and the sample with the
X cursor. (The X and Y cursors are not displayed if they are within the blanking interval.)
The Y cursor position (LINE) is linked to the selected line on the picture,
video-signal-waveform, vector-waveform, and status (data dump) displays.
There are three methods for moving the cursors.
● Using the V POS and H POS Knobs
Turning the V POS knob clockwise moves the Y cursor (LINE) up. Pressing the V POS
knob moves the Y cursor to the center of the picture.
Turning the H POS knob clockwise moves the X cursor (SMPL) to the right. Pressing the H
POS knob moves the X cursor to the center of the picture.
● Using the Control Stick
Tilting the control stick up moves the Y cursor (LINE) up.
Tilting the control stick to the right moves the X cursor (SMPL) to the right.
You can move diagonally using the control stick. If you press the control stick first and then
tilt, the movement will be faster.
● Using the Function dial (F•D)
Select the cursor by following the procedure below, and then turn the function dial (F•D).
Press the function dial (F•D) to switch between LINE and SAMPLE.
Procedure
CINELITE
Settings
LINE:
Turning the function dial (F•D) clockwise moves the Y cursor (LINE) down.
SAMPLE: Turning the function dial (F•D) clockwise moves the X cursor (SMPL) to the
right.
F•2