4. HOW TO USE
20
4.5.1
Setting Method
When one of the slide switches on the DIP switch is in the ON position, that switch is ON.
When a slide switch is in the opposite position, it is OFF. Use an item that has a fine tip,
such as a pen or a pair of tweezers, to move switches between the ON and OFF positions.
When making settings, be careful to not touch any components other than the DIP
switches.
Figure 4-4 DIP switch ON and OFF positions
4.5.2
Setting the channel 1 to 11 input signals
Set the channel 1 to 11 input signal for each channel.
The factory default setting is “no input signal” for all channels.
Figure 4-5 Setting the channel 1 to 11 input signals