©MMXII - LEADER LIGHT – All right reserved
Edition: A - 2012
Additional information on [email protected]
LEADER LIGHT s.r.o.
M.Gorkeho 33
052 01 Spisska Nova Ves
Slovakia
www.leaderlight.eu
USER MANUAL
01 SAFETY INFORMATION
WARNING!!!
Carefully read before installing, powering or servicing. Nothing to do if
anything misunderstand! Installation can be done only by a qualifi ed
professional in accordance with relevant local codes.
01.1 Risk of eyes damage
Do not look directly into LED lamps.
Do not look into light beam from a distance of less than 40 cm (16 inches)!
-
-
01.2 Safety instructions
Shut down power before installation or maintenance.
Do not modify, alter, or attempt to service the LEADER LIGHT appliance. Doing
so will void the warranty.
Appliance and recommended AC power supply must be installed by a qualifi ed
professional in accordance with relevant local codes. Use only acceptable source
of AC power and frequency that complies with local biulding and electrical codes.
Use only the recommended voltage source.
Appliance always connect to earth (eltech.)!
Do not use or do not connect the products if the power cable, power plug or
fi xtures are any way damaged, wet, or if they are overheating.
Before removing or installing any cover or part of appliance disconnect it from AC
power.
AC power supply must be protected against overvoltage and short circuits.
-
-
-
-
-
-
-
-
01.3 Fire protection
Follow all safety restrictions.
Thermostatic switches or fuses never to bypass.
Device and ventilating slots never shield.
Around the axis of the fi tting (180°)
must be maintained space for cooling. Minimum distance from the surrounding
objects must be 100mm (4 in.).
LEDs never direct cover with fi lters or other materials.
Allowing max. ambient temperature is 40°C (104°F).
Luminaries never use without mounting brackets. The housing never install directly
to the surface.
-
-
-
-
-
-
02 PRODUCT SPECIFICATION
02.1 Technical specifi cation
Power connection: AC90-264V, 47-63Hz PowerCon
Control data conn. : DMX 512 In/Out XLR 5pin or cable 1m long for pendant
LED lifetime: 75.000 hours (70% lumen maintenance at T
a
=25°C)
IP: Indoor IP20
Ambient temp. (Ta): max. +40ºC
Cooling Conventional
Installation: Surface / suspended mounting with adjustable bracket
LL HBDW DS21-NA-I20 ...
COMPLIMENTS ON YOUR PURCHASE!
Dimensions
Package includes:
LL HBDW DS21-NA-I20 with adjustable bracket
-
1pc.
User manual
-
1pc.
Additional items needed:
Mounting accessories as necessary
-
Content:
01
SAFETY INFORMATION
01.1 Risk of eyes damage
01.2 Safety instructions
01.3 Fire protection
02
PRODUCT SPECIFICATION
02.1 Technical specifi cation
02.2 Product description
03
INSTALLATION
03.1 Unpacking
03.2 Physical installation
03.3 Connection
03.4 Control data connection
03.5 DMX channels
04
MAINTENANCE AND SERVICE
02.2 Product description
03 INSTALLATION
03.1 Unpacking
Unpack carefully.
This is electronic equipment and should be handled carefully.
Damaged delivered package or if are any mechanical parts broken – it must be
claim immediately by the transport company. Photo pictures as evidence are
valuable for future claim.
-
-
-
03.2 Physical installation
Loading capacity of bearing area has to be at least 10 times the weight of all
device clusters.
Hairbreadth from combustible materials is 0,5m.
-
-
03.3 Connection
Respect all SAFETY INFORMATION 01!
Connect the ground (earth) !
It is not necessary to open the fi xture before power supply ! Power supply is
solved simple with PowerCon connector.
The fi xture is equipped with auto-switching power supply that automatically
adjusts to any 47-63Hz AC power source from 90-264V.
Cord plug connections:
-
-
-
-
-
Symbol
Pin
Wire Colour
Screw (US)
L
live
brown
yellow or brass
N
neutral
blue
silver
ground (earth)
yellow/green
green
!
Non-minimum distance and / or non-use the original brackets is at your own risk!
Page 1 /2
ENVIRONMENTAL PROTECTION
Do not throw away the appliance with the normal household waste at the end of its
life, but hand it in at an offi cial collection point for recycling. By doing this, you help to
preserve the environment.
!
Power In with
PowerCon
290 mm
11.4“
210 mm
8.3“
350 mm
13.8“
DMX Out
XLR 5 pin
DMX In
XLR 5 pin
Rotating DIP address 000÷511
Control LEDs
Dip options
“100“ “10“ “1“
MODE ADDRESS
POWER
DATA
Indication of control LEDs (LED power- green,LED data - yellow)
LED
Indication
Status
LED Power
blinking - 2Hz
O.K. - Device is working correct
LED Data
not lit
No DMX signal
LED Data
blinking - 4Hz
O.K. - Correct DMX signal
LED Data
fast blinking
ERROR - Incorrect digital signal
LED Power &
LED Data
alternating blinking
function AutoRun
