Assembly and disassembly
Display assembly:
Please pay attention to the tightening torque of screws. Damage caused by excessive tightening torque or
incorrect assembly / disassembly is not covered by warranty.
A
–
rubber retaining ring
B
–
display clamping jaws
C
–
screw with Allen head M4x8
When installing the display insert two rubber retaining rings into the display clamping jaws and put them
onto handlebars. Use an Allen wrench to tighten the screws. Set your chosen display angle and tighten the
screws. Tightening torque: 1 Nm
