Leader Fox Braga Скачать руководство пользователя страница 7

 
 
 
Charger: 

 
DONOT dismantle or modify the charger 
DO NOT use to charge other batteries. 
AVOID shocks and contact with water. 
DO NOT touch the charger with wet hands. 
KEEP the charger away from children and animals. 
DO NOT cover the charger nor place any objects on it. 
DO NOT pull the cable when disconnecting the charger, ALWAYS pull the plug. 
DO NOT use the charger if it is clearly damaged. 
 

Basic maintenance and instruction guide for the use of electric bicycle:  
 

Always remove the battery if you are going to manipulatewith the cables or replace any part of the electric 
bicycle, since there is a danger of injury by electrical current. 
If you feel that the electric motor or any of its parts might have gotten loose, make sure that the nuts are 
properly tightened or followfurther information in the user guidebook. 
The chain should be regularly cleaned by cleaning agents for this purpose. Do not use alkaline or acidic 
cleaners to remove rust or dirt. These cleaners will damage the chain. 
Use the battery charger only for itsintended purpose. If the charger or any of its parts is broken, do not use 
it as this could cause injury. 
Electric bicycle is not intended to be used by people with lowered physical, sensory or mental capacities or 
people lacking experience and knowledge required to use the product. 
Electric bicycle is not intended for use by children. 
Do not attempt to repair the electric motor system, as this can cause its damage and malfunction. 
The bicycle electric system is designed to be fully waterproof and can therefore be used even in harsh 
weather conditions or in wet environment. You should, however, avoid its direct dipping in water.  
Do not use high pressure water (WAP) to clean the bicycle. If water gets into the system, this can cause 
damage or corrosion. 
When transporting the bicycle on a vehicle in rainy or wet weather, remove the battery and store it in a 
dry place. 
Handle the bicycle carefully and avoid shocks. 
To clean the battery and all the plastic parts of the system, use a well wrung out, damp cloth. 

 
 
 
 
 
 
 
 
 

Содержание Braga




























Отзывы: