Leader Fox Awalon Скачать руководство пользователя страница 4

Description 

                                                                                                                        

Display 

Controller 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
             
 

 

                                                         Motor    Battery 

 

Factors influencing the electric bicycle range 

 

 

1. Rolling resistance of the tyres. 

Leader Fox e-bikes are fittet with tyres with low rolling resistance and 

increased resistance to puncture. It is also important that the tyres are inflated properly. Therefor, if the 
tyres of your electric bicycle are underinflated, the range will decrease.  

2. Weight of the electric bicycle. 

The lower weight of the electric bicycle, the greater the range.  

3. Battery status

. It depends on whether  the battery was fully  charged before  your  trip. It is also to be 

expected that the higher the number of discharge cycles the battery has undergone, the smaller capacity 
it has.  

4. Profile and surface of the track. 

The higher the elevation difference and the steeper hills you negotiate 

and the worse surface, the shorter the range.  

5. Riding mode. 

It depends on which of the three riding modes you have set.  

6. Continuity of riding. 

The more braking and acceleration, the shorter the range.  

7. Air resistance. 

For example, it depends on whether we ride a bicycle with low frame and sitting upright 

or whether we ride sporty bicycle with seat set to the same height as the handlebars.  

8. Wind strength. 

The stronger the wind we have beck, the longer the range and vice versa.  

9. Weight of the rider and load. 

The greater the weight, the shorter the range.  

10. External temperature. 

The lower the temperature, the less battery capacity can be used while riding.

Содержание Awalon




























Отзывы: