LEAB Clayton Power 1012, Руководство пользователя

Страница: 10 / 20

User Manual Normal Operation
Page 9 of 18
Connecting Consumers
To connect consumers, perform the following steps:
1. Insert the plug of the consumer into the Neutrik input (grey) of the
device.
A Neutrik plug is included. You will find information on how to
install the plug on p. 13.
2. Ensure that the consumers are protected with an adequate protective
device.
The consumer is connected.
8 Normal Operation
The inverter converts the DC voltage supplied by a connected battery into
sinusoidal AC voltage (230 V).
Switching on
The inverter is mounted and installed.
To switch on the device, perform the following steps:
1. Press the on/off button for 2 seconds.

Red and blue LEDs illuminate.

Red LED goes out.

Blue LED illuminates and indicates the start process.

Blue LED lights up continuously, AC voltage is activated.
The device is switched on.
Switching off
To switch off the device, perform the following steps:
1. Press the on/off button for 0.5 seconds.

Blue LED goes out.

Device switches off.
The device is switched off.