The BPC charge booster provides 3 different output voltages:
– 14.1 V for wet batteries
– 14.5 V for gel and AGM batteries
– 15 V for lithium batteries
To change the output voltage, perform the following steps:
ü
The device is ready for operation and is not charging a battery.
1 Press the program button (approx. 6 seconds) until 'LED Failure' and 'LED
Status' illuminate green.
2 Press the program button for a further 3 seconds.
3 To choose between the output voltages, press the program button.
– LED Com: 14.1 V
– LED Failure: 14.5 V
– LED Status: 15 V
4 To store an output voltage, press the program button for 3 seconds until all
LEDs illuminate red.
ð
The output voltage is set.
9.3 Checking the Set Output Voltage
To check the set output voltage, perform the following steps:
ü
The device is ready for operation.
1 Press the program button (approx. 6 seconds) until 'LED Failure' and 'LED
Status' illuminate green.
2 Press the program button for a further 3 seconds.
ð
LEDs illuminate in a chase string. LED for the set output voltage illuminates
green.
9.4 Operating Status
The BPC charge booster indicates the operating status via the LEDs on the
charge booster. In addition, an external LED can be connected.
12
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
LEAB Automotive GmbH
