8 Operation
To charge a battery in technical equipment, proceed as follows:
ü
The battery charger is mounted and installed.
ü
The operating display (3) is lit green.
1. Connect the output lead (2) to the socket on the technical equipment.
ð
The battery charger charges the battery.
9 Maintenance
The battery charger is maintenance-free. If the batteries are not maintenance-
free, check the level of the cells at regular intervals.
10 Troubleshooting
Fault
Possible solution
Operating display (3) does not
illuminate.
Check:
– The fuse
– The voltage at the device
– The voltage in the vehicle power circuit
(Has the undervoltage protection tripped?)
Battery is not charging.
Operating display (3) lit green.
Check:
– The voltage of the battery to be charged.
– The contacts of the plug connection.
Voltage (< 25 V) is supplied to
the device.
Operating display (3) does not
illuminate.
The undervoltage protection has tripped.
Charge the vehicle battery.
MagCode plug does not fit the
MagCode connector.
Check:
– Whether the MagCode plugs are compat-
ible
(12 V plug and 24 V plug repel each other).
10
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
10 Troubleshooting
LEAB Automotive GmbH
