9 Operation
9.1 Charging the battery
To start the charging operation, proceed as follows:
ü
The device is installed.
ü
The battery is connected.
1. Connect the mains plug to a 230 V mains supply.
ð
Charging starts automatically, the yellow LED of the charge status indic-
ator lights up.
ð
If the charging current is 15% below the maximum value, the yellow and
green LEDs of the charging status indicator light up.
ð
When the battery is fully charged, the green LED on the charging status
indicator lights up and indicates the trickle charge
ð
The battery is charged.
9.2 Charging the battery
To start the charging operation, proceed as follows:
ü
The device is installed.
ü
The battery is connected.
1. Connect the mains plug to a 115 V mains supply.
ð
Charging starts automatically, the yellow LED of the charge status indic-
ator lights up.
ð
If the charging current is 15% below the maximum value, the yellow and
green LEDs of the charging status indicator light up.
ð
When the battery is fully charged, the green LED on the charging status
indicator lights up and indicates the trickle charge.
ð
The battery is charged.
9.3 Change charging characteristic
To change the charging characteristic, proceed as follows:
ü
The device is installed.
ü
The battery is connected.
17
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
LEAB Automotive GmbH
9 Operation
