Safety instructions
Read and follow closely all the instructions and warnings before installing and using the product:
The device shall not be opened
Leave the product accessible for easy connection and disconnection
To disconnect the product, simply unplug it from the socket
Normal operation ambient temperature is from 5°C to 40°C
Do not expose the product to any direct heat source or any liquid
Do not obstruct the ventilation or place objects through the openings
In case of product failure, do not attempt to repair it yourself, please contact your reseller for
after-sales support
Devices are intended for use with a mains supply of 230V–50Hz. If you are not sure of the supply
type, please contact your electricity supplier.
To guarantee best throughput possible, it is strongly advised not to plug the product in anti-surge
power strip.
Product warranty will not be effective if the product has been opened or used improperly.
LEA is not liable for any improper use of the produit.
CE conformity
The product complies with applicable security standards CEM 2004/108/CE,
low power 2006/95/CE of the European Community.
Technical support
In case of installation problems, you may:
1. Check the installation guide on the Internet:
www.leacom.fr
2
Click SUPPORT from the menu
2
Select “Downloads”
2. Contact our technical support team:
Email:
After-sales service/Warranty
If, under normal use and care, defects occur on the product within the warranty period,
please contact your reseller.
Warranty period is 2 years.
Further information
For more complex configurations (modem, set-top box, PC, router, etc.) or installation of
additional NetPlugs, please consult the installation guide on the Internet.
Copyright ©2008 LEA S.A.S. All rights reserved. Ref. ass1084.
Set-top box ON
PC ON
w
w
w
Internet
Ethernet
Modem ON
Plug in the 3
rd
NetPlug
Connect
the Ethernet
cable
3
zoom
Adding of 3
rd
Net
Press the pairing button 12 seconds
to reinitialise the NetPlug
Wait for the LED to stop flashing, then proceed to step to link the NetPlugs
flashing
3
3
3
3
flashing
Press the pairing button of the
3
rd
NetPlug for 2 seconds
1 or 2
flashing
Press the pairing button of one of the
first two NetPlugs for 2 seconds
1 or 2
+
=
max. 2 minutes
You have maximum 2 minutes to carry out steps and
Example:
The installation is done when the LED stops to flash. Then, you may launch your application.
N.B. Similar process
for integrating a
4
th
Net
Data transfer on
the PLC network
is activated if IPTV
service is working
3
3
1
2
3
