Lea LE11132-40A3, Оригинальное руководство пользователя, Страница: 35 / 58

GB
19
Fig.16
3) Let the engine oil flow into the container.
4) Refit the oil drain screw and wipe of spilled oil.
5) Refill the oil tank as described in section “ PREPARATION - Filling with
engine oil”
Empty fuel
1) Hold a collection container beneath the fuel tank.
2) Unscrew the tank cap and remove it.
3) Take the machine to bottom up, and drain it.
4) Re do above after several minutes
5) Allow the fuel to run out completely.
Spark plug
Inspect the spark plug regularly. Clean or replace with a new one if necessary.
1)
Disconnect the spark plug connector.
2) Loosen the spark plug with a spark plug wrench and carefully remove it.
3) Check the spark plug for damage and wear. The color of the electrode should
be light-brown colored.
4) Remove debris from the electrode with a soft wired brush; avoid heavy
cleaning of the electrode.
5) Dry the spark plug with a soft cloth if it is wet from fuel.
6) Check the spark plug gap. It should be 0.7 ± 0.08 mm (Fig. 17).
0.7 ± 0.08 mm Fig. 17
7) Replace with a new spark plug if either the electrode or the insulation is
damaged.
8) When replacing the spark plug, first screw it in hand tight and then lightly
tighten it with the spark plug wrench.
Clean the air filter
Inspect the air filter regularly. Replace it with a new one if necessary.
oil drain screw