Lea Connect 164D, Руководство пользователя

Страница: 36 / 45

© 2019 LEA Professional. All Rights Reserved.
35
GLOSSARY |
Features Definitions
CONTINUED
Dante/AES Configuration
The Dante Connect Series uses the Audinate Broadway module which supports both 8x8 Dante and AES
67 digital audio transport. To setup your digital audio network, use the Audinate Dante Controller. After
your Dante or AES67 network is setup, simply go to the LEA Connect Series WebUI input selection page
and select the Dante or AES 67 input you would like the amplifier to use for that channel.
For more information or to download the Dante Controller free software, please visit:
https://www.audinate.com/products/software/dante-controller
3rd Party APIs Support
3 rd party API’s are available on the Connect Series product pages:
www.leaprofessional.com/products
If you don’t see an API for your system, please send your API request to us at:
salesandmarketing@leaprofessional.com
Universal Switch Mode Power Supply with PFC
The power supply we’ve designed for our Connect Series amplifiers is a single stage interleaved PFC
power supply. PFC and isolation stage (normally two separate power stages) merged into one stage with
this type of supply. Consequently, this makes the design smaller, more efficient and cheaper for the
power level.
the type of PFC we are using for LEA products is Active PFC. We chose Active PFC over Passive
because, Active PFC has many advantages over Passive PFC, such as:
1st – Provides universal input and produces a regulated output voltage.
2nd – Active PFC is smaller and lighter, more so as power goes up.
3rd – It’s able to achieve unity power factor across a wide load and input range.
4th – Active PFC can reduce input current harmonics.