G300MkIII Specifications
Power Source Requirements:
230VAC 2200 Watt 50Hz
External Fusing:
12AT ceramic
Internal Fusing:
500mA PCB transformer
Fluid Capacity:
Detachable 5-Litre Bottle Carrier
Control:
Manual or DMX
DMX 512:
3-channels Output, Smoke On delay, Aux Fan
Typical Smoke Output:
550 m
3
/min. 250 m
3
/min continuous
Machine Dimensions:
L41 W29 H20
Weight (Fluid Not Included):
12kg
Fluid Use
Only Le Maitre® Ltd Smoke Fluids should be used. Use of other fluid may cause incorrect operation and
could cause toxicity issues.
Replacing fluid merely requires of the changing the empty bottle for a new one. Use the screw cap to seal
the used bottle and dispose of correctly. Refilling the empty bottle is not advised as this can lead to the
introduction of foreign particles which may reduce the efficiency of the external in-line filter. If it is felt
that there is a reduction in the performance of the machine then this filter should be checked and
cleaned.
Never operate the machine with this filter removed.
Any spillage should be cleaned away. The fluid does not require anything other than a water-based
cleanser.
THE G300MkIII should not be run without fluid for any length of time as this will cause pump failure.
Fluid pump priming should be performed at the maximum smoke output, to ensure a quick and air lock-
free process.
