V 1.2
23
that it is not working correctly and perhaps incorrectly disabling the machine, it can be
disabled from this setting. Contact LeMaitre is this occurs.
Fluid Level Sensor:
A fluid sensor is present and attached to the fluid bottle cap. Once calibrated correctly
for the fluid type, it can provide fluid level readings. It will report a warning and flash
up a low fluid message on the display should the fluid level drop below a certain level.
If this is not required, then it can be disabled from this setting. The fluid level sensor is
disabled by default.
Saving the Settings
Once all the setting changes are complete, click/press the Save button. This will store the settings
onto the G300-Smart.
The machine may reboot the Wi-Fi processor, if you set the Unique ID or wired Ethernet IP
settings. If this occurs, you may have to reconnect to the webserver Wi-Fi point again.
