Le Feu 1000, Руководство пользователя

Страница: 5 / 14

DO NOT PRESS THE POWER BUTTON MORE THAN INSTRUCTED
• Press the power button once: Initiates the burner itself – not the flames.
• Within 10 seconds press the power button second time: Initiates the pilot and bioethanol flow.
NEVER PRESS THE POWER BUTTON A THIRD TIME
• During the initial use, you will notice the pilot become red and bioethanol begin to drip into the
combustion tray. Bioethanol will continue to flow for approximately 2 minutes while the burner is starting
up. During this time
DO NOT PRESS THE POWER BUTTON.
WARNING
• Never refill the burner when the fireplace is operating or still hot.
• Never pour bioethanol into a burning flame.
• Allow the burner to cool down for at least 30 minutes before refilling.
• This burner is designed for indoor use only.
2. BIO-ETHANOL INFORMATION
• USE ONLY APPROVED BIO-ETHANOL LIQUID FUEL (Purity: 95% or above) FOR INDOOR FIREPLACES .
• Observe all instructions from the manufacturer of the bioethanol.
• Always wash hands after handling and using bioethanol.
• Always keep bioethanol out of the reach of children, at room temperature and away from direct sunlight.
• Do not store the bioethanol near heat sources.
• Do not store the bioethanol near open fire.
• Bioethanol should always be used with care and caution.
• Bioethanol is extremely flammable, therefore show responsibility and follow applicable advice and
legislation.
• Bioethanol causes severe eye irritation. In case of contact with eyes, carefully rinse with water for several
minutes. If you have contact lenses, remove them. Contact your doctor and bring the packaging.
• DO NOT
ingest bioethanol. If this happens, contact a doctor immediately and bring the packaging.
1. REQUIRED READING BEFORE USE
Before filling your burner, it is important that you follow the step-by-step guide on
the next two pages.
Please note: The burner is equipped with a 10-minutes safety feature:
Power and arrow
buttons are flashing for 1 minute and you’ll experience non-response until temperature reach
safe level. Once the burner is powered off, you must wait 10 minutes prior to restart.
5