LE CACHE 1400, Руководство пользователя

Страница: 10 / 31

L E C A C H E P R E M I U M W I N E C A B I N E T S
-9-

CellarPro 1800QT is 30% more powerful and noticeably louder than the 1800QTL. It
is most appropriate for use with our larger wine cabinets. When combined with our
sound hood (sold separately), the noise level is equivalent to the 1800QTL.

CellarPro 1800XT is slightly more powerful than the 1800QT, and is recommended
when cabinets will be placed in difficult environments like garages (not to exceed 95
degrees), basements and/or commercial establishments.
(1) To calculate the approximate "run time" over a 24-hour period, divide the thermal load
(based on the average ambient over the 24-hour period) by the BTUH.
FLOOR SURFACE
Because of the significant weight of your wine cabinet, it is important that it be placed on a
hard surface, otherwise the cabinet may become skewed if the doors settle unevenly over
time. If you will be placing your cabinet on thick carpeting, consider placing a carpet board
underneath the wine cabinet. You can purchase a carpet board from Le Cache, or you can
have your local hardware store cut a 3/4 inch plywood board to the following dimensions
(inches):
Model # Length Width
Carpet Board Dimensions – All Series
1400 26.5
25
2400 35 25
3100 45 25
3800 54 25
5200 69.5 25
Euro Credenza 63 25
Contemp Credenza 61 17
POWER REQUIREMENT
The cooling unit plugs into a standard wall outlet. The components of the cooling unit draw
3 amps, and the electric outlet on the side of the cooling unit also is rated for 3 amps. The
cord extends 6 ½ feet from the back of the cabinet. If an extension cord is used, it should be
14-gauge wire or thicker, grounded, and as short as possible. We recommend using a surge
protector rated at 15 amps or more, and using a dedicated 15-amp circuit.
Under no
circumstances should the wine cabinet share a circuit with another motor or
compressor-based appliance, like a wine cooler, fridge or air conditioner.