LDS Dactron FOCUS II, Системное руководство

Страница: 19 / 70

Safety
and Equipment Protection
Focus II System Guide 15
Danger Warnings
The warning messages below, and throughout this guide, are important
notices regarding safe system operation and system protection.
Instructions given by these warnings must be followed to ensure safety
for both personnel and equipment.
Warning
Dangerous voltages may be present in the system. Use
the same care as you would for any electronic
equipment when handling, calibrating, or maintaining
this system.
Warning
Under no circumstances should an operator remove
any covers, screws, or in any way enter the
Focus II
System. There are no operator settable controls or
adjustments inside the
Focus II .
Warning
To prevent potential fire or shock hazard, do not
expose the system to rain or moisture.
Warning
Do not connect analog voltage signals exc40
Volts to the input or tachometer channels or the
system electronics may be damaged.
Warning
Do not connect an analog voltage source to the
output channel or the system electronics may be
damaged.