LDR Cetra F100 C Скачать руководство пользователя страница 5

Страница: 5 / 13

Cetra F & PC 100 LED User’s Manual – 1.0

Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy

Tel. +39 0376 771 777 – fax +39 0376 772 140 – email

[email protected]

– web www.ldr.it

4. CONTROL FUNCTIONS AND OPERATION
OPERATION

: LCD display for DMX address, system setup and status details.

POWER

: power LED status indicator , red color. ON= power

DMX

: DMX LED status indicator, green color. LED OFF = DMX OFF and manual control activated , LED ON = DMX MODE

activated with no DMX signal, FLASHING LED = receiving DMX

MENU

: rotary switch selector to select and modify the operational modes. Turn left or right to navigate through the

menu and press to select or to confirm

DMX IN

: input DMX signal (pin1=0 , pin2= DATA- , pin3=DATA+ ).

DMX OUT :

Loop through DMX signal output

POWER IN:

Mains power input

POWER OUT

: Mains power output

FUSE

: 5x20 6.3A HPC FAST

There are thirteen different operation menus for the setting of the CETRA LED control functions. The rotary selector is

used to adjust the settings and to navigate through the menu structure. Turn left or right to select the menu and push

to access or to confirm the selected data or functions.

4.1 DMX OR MANUAL (Mode):
Select the LED control mode between DMX (factory setting) and manual. To change the control mode press once the

rotary selector until an arrow (

←

) appears on the menu. Turn the selector to the right or the left to select the desired

mode of operation and press to confirm your selection.

Tap the rotary selector and the LCD screen will display the mode status and the current value :

4.2 DMX ADDRESS (Addr):
It allows to select the initial DMX starting address to remotely control the LED functions. To change the initial DMX

address press the rotary switch until an arrow appears, then turn to change to the desired DMX starting address. Press to

confirm your selection. Factory setting is

001

4.3 DIMMER RESOLUTION (8/16b):
The dimming resolution can be controlled at 8 bits from one DMX channel to 16 bits with 2 DMX channels.
Factory setting

8 Bit

1 M:Manual

XX %

1 M:DMX

XX %

1 Mode

DMX

1 Mode

MANUAL

TAP THE ROTARY

SELECTOR TO DISPLAY

THE VALUE

TAP THE ROTARY

SELECTOR TO DISPLAY

THE VALUE

00 % = LED OFF

FF % = LED FULL

00 % = LED OFF

FF % = LED FULL

2 Addr

001

PRESS TO ACTIVATE

THE MENU AN

ARROW SHOULD

APPEAR

1 Mode

DMX

1 Mode

DMX

←

1 Mode

MANUAL

←

TURN TO SELECT

MANUAL OR DMX

AND PRESS TO

CONFIRM

2 Addr

001

←

1 Addr

###

TURN TO ASSIGN

THE DMX ADDRESS

AND PRESS TO

CONFIRM

PRESS TO ACTIVATE

THE MENU AN

ARROW SHOULD

APPEAR

Содержание Cetra F100 C














Результаты поиска

Содержание Cetra F100 C

Отзывы:

Похожие инструкции для Cetra F100 C

Бренды по названию

Популярные бренды

LDR Cetra F100 C, Руководство по эксплуатации

Результаты поиска

Содержание Cetra F100 C

Отзывы:

Похожие инструкции для Cetra F100 C

Бренды по названию

Популярные бренды