LDR Astro 250 Wi-fi RGBW Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 38

LDR Astro 250 Wi-fi RGBW Скачать руководство пользователя страница 29

Astro 250 Wi-Fi RGBW, DMX 512+ RDM LED followspot - User’s Manual – 1.0

Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy

Tel. +39 0376 771 777 – fax +39 0376 772 140 – email

[email protected]

– web www.ldr.it

28

16.

RE.CHARGING YOUR MOBILE’S BATTERIES

A USB Port is provided on the rear of the Astro. This will allow you to re-charge your device

while the Astro is being operated, without risking to run flat on batteries during a show or having to

rely on an external power supply unit.

17.

CLAMP-ON MOBILE DIGITAL DIMMER, supplied

The Astro Wi-fi is supplied with a clamp-on mobile digital dimmer, which is packed separately

in a plastic bag inside the box/flight case of the Astro. Please refer to the dimmer’s separate

Instruction manual provided in the packing.

18.

FOCUSING

This fixture features a variable beam angle from 8° to 22°. The variable beam is modified by

adjusting the front and rear zoom lenses in relation to each other.

The front lens defines the beam spread, the rear lens defines the focus degree of ‘softness’ or

‘hardness’ of the beam edge or shutters.

19.

CLEANING AND MAINTENANCE

To ensure maximum performance of the product, a regular maintenance service should be

carried out. Please make sure the product is cold and disconnected from power supply when doing

this.

General maintenance

* Clean all reflective parts such as lenses opening the product, if necessary.

* Check the lenses and replace any visibly damaged component.

* Clean air ducts and fans in order to allow a proper ventilation activity on the product.

* Check internal and external wiring and replace any cable which should be damaged by heat

or mechanical agents.

Cleaning of optical components

LEDhouse lenses:

Open the lens compartment door by removing the two M4 cross head screws on the top of the

ledhouse tube and slide the top cover free

Remove the condensor lenses assembled block by removing the two M5 cross head screws.

Clean the lenses with a soft cloth and re-position

Zoom lenses:

«
...
27
28
29
30
31
...
»

Содержание Astro 250 Wi-fi RGBW







































Отзывы:

Нет отзывов