Zhengzhou Ledy Optical-Electrical Technology Co., Ltd.
Technical parameters
Model
Voltage
Rated output
Rated frequency
Waterproof
Color temperature
DFL-10Q
AC110V~240V
11w
50~60HZ
non
6500K
Installation
Choosing the projector install location and position
,
put the projector through a ceiling
hole, then pull the circlip racks in direction away from lens, loosen the circlip racks,
adjust the projector to upright state.
Gobo replacement
Screw off the front shell, get off the circlip, take out the gobo, and put into the new one,
compress by circlip, then install back front shell.
Sharpness Adjust
Turn on the projector power, rotate the lens. When projection distance is long, shorten
the lens till image clear; While distance is short, lengthen the lens till image clear. And
the last, please fasten the lock nut to avoid loosening of lens.
