LDLC GT PLATINUM
U S E R ’ S G U I D E
EN
Carton contents
• LDLC GT PLATINUM series Power Supply Unit
• Modular cable pack
• User Guide
• AC power cord
• PSU bag
Technical features
• A high performance for energy savings. 80 PLUS Platinum Certification: High
energetic efficiency. The 80 PLUS Platinum Certification guarantees greater than
90%, 92% and 89% efficiency at 20%, 50% and 100% operating loads,
respectively.
80 PLUS Test Type
115V internal non-redundant
230V internal redundant
Power Supply use rate
10%
20%
50%
100%
10%
20%
50%
100%
80 PLUS PLATINUM
-
90%
92%
89%
-
90%
92%
89%
• Japanese capacitors of 105°C nominal provides a quality reliability/performances.
• A 12V monorail for a better current distribution.
• Active PCF. A correction of the active power factor >0.90 at full load that provides
a clean and reliable current.
• An advanced cable set covering all kind of PC.
• A DC fan of 120mm provides an excellent air flow with a very low noise level. 12V
DC, 62CFM/min, <30.83dB(A), This fan is only for power supply internal cooling
purpose, not for system cooling.
• Hybrid mode:
◦ The Normal Fan Control setting (button pushed) enables the fan to rotate
continuously in Silent Mode and Cooling Mode, depending on the system load.
◦ The Hybrid Silent Fan Control setting (button not pushed) enables the power
supply to run in Fanless Mode up to 20 % (± 5 %) of the maximum rated load
at 25 degrees. When the load further increases, the fan control will keep
regulating perfect cooling through the Silent Mode or Cooling Modes.
• Ample +12V Output: Enhanced +12V current output capability increases
utilisation possibilities by ensuring that there is adequate power to support all the
powerhungry system components.
• Ultra-Ventilation [Honeycomb Structure]: Honeycomb-shaped ventilation holes
optimize airflow for improved cooling and reduced noise.
