PAGE 15
Force a Full Tune Cycle
Sometimes, if you are transmitting on a previously tuned frequency, but something has
slightly changed in your antenna system (maybe the antenna was re-oriented, for example),
performing a memory recall tune will find a stored match that is acceptable, but is not as optimal
as could be. In this case, forcing a full tune will cause the Z-817H to seek a better match than the
match already stored in memory for this frequency.
To force a full tuning cycle, first bypass the amplifier. Then, press and hold the
Tune
button on the front panel of the Z-817H until the
Status LED
lights up, and keep holding until
the
Status LED
goes out again. Release the
Tune
button once the
Status LED
goes out. A full
tuning cycle will begin. When tuning is complete, the transceiver will be restored to its
previous operating mode and power level. Place the amplifier back in active mode, and begin
transmitting.
