background image

 

 

PAGE 16

 

 

OUT  OF WARRANTY  SERVICE 

Any  time  a  product  fails  after  the  warranty,  LDG  wants  to  help  you  get  it  fixed.  Send  the 

product  to  us  for  repair  and  we  will  determine  what  needs  to  be  done.  Based  on  your  prior 
instruction,  we  will  either  contact  you  with  an  estimate  or  fix  it  and  contact  you  with  a  request  to 
pay  any  repair  charges.  Please  contact  LDG  if  you  have  any  questions  before  you  send  us  an  out-
of-warranty  product for  repair.   

RETURNING YOUR  PRODUCT  FOR SERVICE 

Returning  a  product  to  LDG  is  easy.  We  do  not  require  a  return  merchandise  authorization. 

Visit  the  Customer  Support  Center  and  download  the  LDG  Product  Repair  Form.  On  the  Repair 
Form  tell  the  LDG  technicians  exactly  what  happened  or  didn’t  happen  and  why  you  believe  the 
product  needs  servicing.  The  technician  attempts  to  duplicate  the  problem(s)  you  had  based  on 
how  well  you  describe  it  so take the  time  to be accurate  and complete.   

Ask  your  shipper  for  a  tracking  number  or  a  delivery  verification  receipt.  This  way  you  know 

the  product  arrived  safely  at  LDG.  Be  sure  to  give  us  your  email  address  so  our  shipper  can  alert 
you  online  when  your  product  is  en-route  back  to  you.  We  regret  that  we  are  not  able  to  provide 
periodic  updates  on  the  status  of  repairs.  Please  be  assured  that  our  staff  makes  every  effort  to 
complete  repairs  ahead  of our published  wait  time.  Your  patience  is appreciated.   

Repairs  can  take  six  to  eight  weeks,  but  are  usually  faster  than  this.  The  most  recent 

information  on returning  products  for  service  is  found  at the  LDG Customer  Support Center.   

Ship  your  carefully  packaged repair  with  the Repair  Form  to: 

 

LDG  Electronics,  Inc. 

Attn:  Repair  Department 

1445 Parran  Rd 

St. Leonard,  MD 20685 

PRODUCT  FEEDBACK 

We  encourage  product  feedback!  Tell  us  what  you  really  think  of  your  LDG  product.  In  a  card, 

letter,  or  email  (preferred)  tell  us  how  you  used  the  product  and  how  well  it  worked  in  your 
application.  Send  along  a  photo,  schematic  or  drawing  to  illustrate  your  narrative.  We  like  to  share 
your  comments  with  our staff,  our  dealers,  and other  customers  at the LDG  website.   

 

http://www.ldgelectronics.com

 

 

Содержание Z-100Plus

















Отзывы: