9
\
Step 4: Carefully route the two coaxial cables attached to the OT-11P through the round grommet
at the center rear of the radio. The coax cable connectors have flanges, pushing them through one
at a time will make it easier. Route the two cables between the left rear shield panel and the
circuit board mounted vertically in the left rear, to the area directly behind the two SO-239
antenna jacks.
Step 5: Turn the radio over and locate the two coax PC jacks on the PC board mounted flush
against the back of the radio, directly behind the
ANT 1
SO-239 antenna jack. There is a jumper
connecting these two jacks. Carefully remove the jumper and discard it (or, you can save it in
case you want to uninstall your OT-11P tuner, but why would you ever want to do that?).
