Rev 7/2014 V4.4
| Specifications subject to change without notice.
Seite
3
Safety Guidelines
Please read these safety guidelines carefully before you take the Nano*Pix 1440 HP / 2880 fixture into
service.
Check the suitability of the product for the intended use.
The Nano*Pix 1440 HP / 2880 HP fixture is not suitable for outdoor use (IP20).
Never expose your eyes to direct beam of the LED light source
Do not use optical devices or other means of focussing the LED beam apart from products supplied for this purpose by
LDDE
Do not attempt to repair or dismantle the Nano*Pix 1440 HP / 2880 HP fixture: Opening and removing the internal covers
can result in electrocution or other serious injuries.
In case of product failure, please contact LDDE or an authorised LDDE-dealership
Do not touch the fixture while it is in use.
Disconnect the fixture from the power supply before re-positioning and cleaning
Protect the Nano*Pix 1440 HP / 2880 HP fixture from shocks and impacts.
Protect the fixture from moisture and water and avoid contact with moist or wet appliances.
Relative air humidity during operation should be between 20 % and 85 %.
Ensure that the fixture is not covered and adequate ventilation is in place.
Do not insert objects into openings of the housing that are connected to live parts as this can lead to short circuiting.
Danger of electric shock and risk of fire.
The fixture is to be removed from service if:
o
there is visible damage
o
parts have become lose
o
there is visible damage to cable connections
LDDE products are manufactured and delivered in concordance with EU directive 2002/96/EU of the European Parliament
and the Council on Waste Electrical and Electronic Equipment WEEE). Help protect the environment and dispose of used
products at your local recycling station. Your dealership can offer further advice on correct disposal.