IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
11
PROBLEM
DISPLAY
SOLUTION
No sound or volume too
low.
Receiver: Display is switched off.
Make certain that the batteries are not dead and
the receiver is on.
Transmitter: Display is switched off.
Check the connection between power supply and
transmitter. Turn on the transmitter.
Receiver: is on, but the RF indicator is
not lit.
Make certain that the transmitter and receiver are
set to the same radio frequency.
Reduce the distance between transmitter and
receiver and make certain that there is a direct
line of sight between transmitter and receiver.
Make certain that the transmitter antenna is
installed correctly.
Receiver: is on and the RF indicator is lit.
Increase the volume at the receiver and check the
headphone connection.
Check the input level on the transmitter and
increase it if necessary.
Distortion or noise.
Receiver: RF indicator is on.
Increase the distance to possible causes of
interference (digitally controlled devices, e.g., CD
players, computers, digital consoles…).
Use a different radio frequency.
Distorted sound.
Receiver: Battery symbol is flashing.
Replace the batteries with new ones.
Transmitter: Level indicator is too high
Reduce the volume at the level controls of the
transmitter or the volume of the source device.
SETUP AND TROUBLESHOOTING
SETUP
For optimal transmission, position the transmitter at a minimum height of 1 m and orient the antenna vertically upwards. When using multiple
wireless systems in one installation, make certain that the antennas do not touch or cross. Do not position the transmitter in the immediate vicinity
of metal objects and digitally controlled devices (CD players, computers, digital consoles, etc. ): There should be a direct line of sight between
transmitter and receiver.
TROUBLESHOOTING
