LCN 4110 Series Peel-N-Stick Скачать руководство пользователя страница 33

Страница: 33 / 74

LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100

PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
3/10

LCN

4030T SERIES

Available
Not available

Closer available with less than 5.0 lbs. opening force on 36" door.

**Maximum opening/hold-open point with standard template. See individual closer series

for degrees of opening per installation.

*** Advanced Variable Backcheck

CLOSER MOUNTS

*HINGE (PULL) SIDE

TOP JAMB (PULL SIDE)

STOP FACE (PUSH SIDE)

*HINGE (pull) side mount shown

Standard 4031T series closer is shipped with a standard arm, metal

cover, a standard track and wood/self-tapping machine screw pack. See
4030T Series page 37 for options.

Non-sized 4031T cylinder for interior doors to 38” (965 mm).

Closer mounts pull side on door, pull side on frame and push side on
door, on either right or left swinging doors.

Closer meets ADA requirements. See 4030T Series page 38.
Standard or optional custom powder coat finish.
Optional plated finish on metal cover, arm and fasteners.
Optional SRI primer for installations in corrosive conditions is available

with powder coat only.

The 4030 Series is UL and cUL listed for Self-closing doors without hold-open.
Tested and certified under ANSI Standard A156.4, grade one.

The 4031T is a single lever (track)

arm, surface mounted closer

designed for interior use on

narrow head frames and top rails.

The choice of three mountings and

ease of installation offer a

versatile solution to door control in

moderate traffic applications. The

4030T compliments the heavy duty

4000 Series.

Cast Iron

Heat Treated Steel Pinion

All Weather Fluid

UL & cUL Listed

Содержание 4110 Series Peel-N-Stick











































































Результаты поиска

Содержание 4110 Series Peel-N-Stick

Отзывы:

Похожие инструкции для 4110 Series Peel-N-Stick

Бренды по названию

Популярные бренды

LCN 4110 Series Peel-N-Stick, Руководство по эксплуатации продукта

Результаты поиска

Содержание 4110 Series Peel-N-Stick

Отзывы:

Похожие инструкции для 4110 Series Peel-N-Stick

Бренды по названию

Популярные бренды