INSTALLATION
1.
cannot
2.
3.
Fig. 2 Do not pinch wires when installing
closer into headframe.
1
.
g
i
F
.
4
5.
Fig. 1
6.
Fig. 1
7.
Fig. 3. DO NOT FORCE SCREWS
Fig. 4
Make sure hand of closer matches hand of door. Remove
finish plates. Hand of closer is printed on the mounting
plate label. Hand of closer
be reversed. See
diagram above to determine hand of door.
Prepare and mortise door & frame per template on pg. 4.
For 2210DPS: connect wire leads to monitor device as
shown in
.
(Switch contact information with
door closed and switch closed.)
Install closer in prepared headframe, as shown in
,
with spring tube pointing away from hinge. Fasten mounting
plate to jamb with 1/4 - 20 x 5/8 PHMS provided.
Install track in door. Roller access hole must be toward latch
edge of door, as shown in
. Fasten with 1/4 - 20 x 1/2
TORX MS provided.
Connect arm assembly to track by placing plastic roller at
end of arm into the roller access hole in track. See
.
Let arm assembly rest on top of installed track.
To attach arm to closer:
7A.
Open door out of working area.
7B.
With a 3/32” hex wrench, turn latch & main speed
regulating screws all the way in (clockwise). See
.
7C.
Using an adjustable wrench, rotate door closer shaft
approximately 90°. See
. (R.H. - clockwise /
L.H. - counterclockwise).
12/10 © 2010 SCHLAGE LOCK Company. All rights reserved. DP # 18363rF
INSTALLATION
INSTRUCTIONS FOR
DOOR CLOSERS
2210DPS SERIES
IMPROPER INSTALLATION OR REGULATION
MAY RESULT IN PERSONAL INJURY OR
PROPERTY DAMAGE. FOLLOW ALL
INSTRUCTIONS CAREFULLY. FOR
QUESTIONS CONTACT LCN CLOSERS
800-526-2400
CAUTION
LEFT
HAND
DOOR
RIGHT
HAND
DOOR
HOW TO TELL HAND OF DOOR
CLOSER
ASSEMBLY
MOUNTING
SCREWS
FINISH
PLATE
ARM
ASSEMBLY
ROLLER
ACCESS
HOLE
FINISH PLATE
TORX SCREWS
ARM SHAFT
SCREW
TRACK
TORX
SCREWS
TRACK
90°
FROM
2210DPS
TO MONITOR
DEVICE
BLACK (COM)
BLUE (N.C.)
RED (N.O.)
Standard door position switch supplied has
contacts rated at 10.1 amp 125/250 VAC
Fig. 1
Fig. 2
Fig. 4
Fig. 3
LATCH
SPEED
MAIN
SPEED
BACK
CHECK
TM
(Switch contact information
with door closed.)
1-800-526-2400
®
Содержание 2210DPS Series
Страница 4: ......
