Mixlaser RB User Manuel
- - 4 - -
1.Safety Instructions
1)Please open and check whether break or not for transport once receive this fixture, if yes, not use
it and contact dealer or manufacture as soon as possible.
2)The Max applicable temperature for the light is 40°C. Do not use the light under or above the
temperature. ta=40
℃
3)The fixture is applicable for many occasions,
it should keep clean, and avoid long use in
overheating or dusty environment. To prevent the fixture from the chemical liquid .
4)User must be careful of fire, heat, electric and fall-off that make heavy or fatal injury. Please read
this user manual carefully before power on and installation, following safety and operation
instruction in it. If still have any questions, please contact dealer or manufacture.
5)User must following this user manual, do not open fixture by yourself, if any problems, please
contact professional technician, maintenance should by technician.
Do not power on or start the fixture before installation, please stop after working more than 8
hours, which will longer use life.
6)Fixed installation, do not by strong shocks.
7)The minimum distance between light and the illuminated surface must be more than 1 meter.
8)Never look directly into the light source to avoid hurt to eyes (especially epileptics)!
9) When dustproof glass at light output breaks, cracks or other visible damage, user should replace
with new glass to continue to use.
2. Installation
When install this equipment please make sure there's no flammable surfaces (decorated things,
etc) and minimum distance of 0.5M from the equipment to the flammable.
The installation of the effect has to be built and constructed in a way that it can hold 10 times the
weight and without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety rope.Never stand directly below the device when mounting, removing or servicing the
fixture.
3
、
Technical Specifications
1. Power supply: AC100V~240V 50/60Hz
2. Amp:
：
BGDP
￠
5x20mm
250VAC T2A
3. Rated power: 90W
4. Laser: R:150m/650nm,B:150mw/450nm
5. LED
：
1pc 60W RGBW 4in1
；
8pcs 3W White LED
6. LED effect:Derby
7. Laser effect:8 grating effect
8. Control mode: Sound Active/ Auto-play/DMX512/Master-Slave
9. Channel
：
10
10. Scan system
：
Step motor
11. Operating temperature:10
℃
~40
℃
12. Inner Packing(mm):340*270*340
13. Outer Packing(mm):560*360*365 (2pcs)
