LC HML 210 Скачать руководство пользователя страница 5

Страница: 5 / 44

HML 210

information about the converter. If you are unclear on anything in these Operating

Instructions, you must call the service.

The converter should only be installed after have verified technical data provided in

these operating instructions and on the data plate.

Specialists must take care during installation and use personal protective equipment as

provided by any related security plan or risk assessment.

Never mount or wire the converter while it is connected to the power supply and avoid

any liquid contact with the instrument’s internal components. To connect remove the

terminals from the terminal block.

Before connecting the power supply check the functionality of the safety equipment.

Repairs may only be performed if a genuine spare parts kit is available and this repair

work is expressly permitted.

10)

For the cleaning of the device use only a damp cloth, and for the maintenance/repairs

contact the service center.

Before starting up the equipment please verify the following:



Power supply voltage must correspond to that specified on the data plate



Electric connections must be completed as described



Ground (earth) connections must be completed as specified

Verify periodically (every 3-4 months):



The power supply cables integrity, wiring and other connected electrical parts



The converter housing integrity



The suitable tightness of the sealing elements



The front panel integrity (display and keyboard)



The mechanical fixing of the converter to the pipe or wall stand.

SAFETY CONVENTIONS

DANGER

Warning indicates an action or procedure which, if not performed correctly,

can result in injury or a safety hazard. Comply strictly with the instructions

and proceed with care.

WARNING

Caution indicates an action or procedure which, if not performed correctly, can

result in incorrect operation or destruction of the device. Comply strictly with

the instructions.

NOTES

Note indicates an action or procedure which, if not performed correctly, can

have an indirect effect on operation or trigger an unexpected response on the

part of the device.

Содержание HML 210













































Результаты поиска

Содержание HML 210

Отзывы:

Похожие инструкции для HML 210

Бренды по названию

Популярные бренды

LC HML 210, Руководство по эксплуатации и установке

Результаты поиска

Содержание HML 210

Отзывы:

Похожие инструкции для HML 210

Бренды по названию

Популярные бренды